Planet IGS-10020HPT Bedienungsanleitung
Stöbern Sie online oder laden Sie Bedienungsanleitung nach Router Planet IGS-10020HPT herunter. PLANET IGS-10020HPT User Manual Benutzerhandbuch
- Seite / 658
- Inhaltsverzeichnis
- LESEZEICHEN
- TABLE OF CONTENTS 3
- 1. INTRODUCTION 24
- 1.2 Product Description 25
- 1000Base-T UTP with PoE 26
- 1.3 How to Use This Manual 28
- 1.4 Product Features 29
- 1.5 Product Specifications 32
- 2. INSTALLATION 36
- 2.1.2 Front Panel 37
- 2.1.3 LED Indicators 38
- 2.1.4 Wiring the Power Input 40
- 2.2.1 Installation Steps 44
- 2.2.2 DIN-Rail Mounting 45
- 2.3 Cabling 48
- 2.3.2 Remove the Module 51
- 3. SWITCH MANAGEMENT 52
- 3.3 CLI Mode Management 54
- 3.4 Web Management 56
- 4. WEB CONFIGURATION 60
- 4.1 Main Web Page 63
- 4.2 System 65
- 4.2.2 IP Configuration 66
- 4.2.3 IPv6 Configuration 67
- 4.2.4 Users Configuration 68
- Add / Edit User 69
- 4.2.5 Privilege Levels 71
- 4.2.6 NTP Configuration 72
- 4.2.7 Daylight Saving 74
- 4.2.8 UPnP 76
- 4.2.9 DHCP Relay 77
- 4.2.10 DHCP Relay Statistics 79
- 4.2.11 CPU Load 80
- 4.2.12 System Log 82
- 4.2.13 Detailed Log 83
- 4.2.14 Remote Syslog 84
- 4.2.15 SMTP Configuration 85
- 4.2.16 Digital Input/Output 86
- 4.2.17 Fault Alarm 88
- 4.2.18 EEE Power Reduction 89
- 4.2.19 Web Firmware Upgrade 90
- 4.2.20 TFTP Firmware Upgrade 91
- 4.2.21 Configuration Backup 92
- 4.2.22 Configuration Upload 94
- 4.2.23 Image Select 95
- 4.2.24 Factory Default 96
- 4.2.25 System Reboot 97
- 4.3.1 SNMP Overview 98
- 4.3.4 SNMPv3 Configuration 103
- 4.4 Port Management 109
- 4.4.3 Port Statistics Detail 112
- 4.4.4 SFP Information 114
- 1000Base-SX 114
- 1000Base-LX 114
- 100Base-FX 114
- 4.4.5 Port Mirror 115
- • Mirror Port Configuration 116
- 4.5 Link Aggregation 117
- 4.5.1 Static Aggregation 120
- 4.5.2 LACP Configuration 122
- 4.5.3 LACP System Status 123
- 4.5.4 LACP Port Status 124
- 4.5.5 LACP Port Statistics 125
- 4.6 VLAN 126
- 4.6.2 IEEE 802.1Q VLAN 127
- ■ 802.1Q VLAN Tags 128
- 4.6.3 VLAN Basic Information 130
- 4.6.5 VLAN Membership 135
- 4.6.6 VLAN Membership Status 136
- 4.6.7 VLAN Port Status 138
- 4.6.8 Private VLAN 139
- 4.6.9 Port Isolation 140
- 4.6.10 VLAN Setting Example: 142
- 4.6.10.3 Port Isolate 147
- 4.6.11 MAC-based VLAN 148
- 4.6.12 MAC-based VLAN Status 149
- 4.6.13 IP Subnet-based VLAN 150
- 4.6.14 Protocol-based VLAN 151
- 4.7 Spanning Tree Protocol 154
- Basic Settings 161
- Advanced Settings 162
- 4.7.3 Bridge Status 163
- 4.7.5 MSTI Priorities 167
- 4.7.6 MSTI Configuration 168
- 4.7.8 Port Status 171
- 4.7.9 Port Statistics 172
- 4.8 Multicast 174
- Type Response Time 176
- 4.8.5 IGMP Snooping Status 183
- 4.8.6 IGMP Group Information 184
- 4.8.7 IGMPv3 Information 185
- 4.8.11 MLD Snooping Status 190
- 4.8.13 MLDv2 Information 192
- 4.8.14 MVR 193
- 4.8.15 MVR Status 195
- 4.8.17 MVR SFM Information 197
- 4.9 Quality of Service 199
- 4.9.2 Port Policing 200
- 4.9.3 Port Shaping 201
- 4.9.4 Port Classification 203
- 4.9.5 Port Scheduler 206
- 4.9.6 Port Tag Remarking 206
- 4.9.7 Port DSCP 208
- 4.9.8 DSCP-Based QoS 210
- 4.9.9 DSCP Translation 211
- 4.9.10 DSCP Classification 213
- 4.9.11 QoS Control List 214
- 4.9.12 QoS Status 217
- 4.9.13 Queue Policing 219
- 4.9.15 QoS Statistics 221
- 4.9.17 Voice VLAN OUI Table 224
- 4.10 Access Control Lists 225
- 4.10.3 ACE Configuration 229
- FRAG OFFSET) field for an 234
- 4.11 Authentication 241
- Port Configuration 250
- Port State 258
- Port Counters 259
- 4.11.7 RADIUS Overview 268
- 4.11.8 RADIUS Details 270
- RADIUS Accounting Servers 273
- 4.12 Security 284
- System Configuration 285
- 4.12.2 Access Management 288
- 4.12.4 HTTPs 290
- 4.12.5 SSH 291
- 4.12.6 Port Security Status 292
- 4.12.7 Port Security Detail 294
- 4.12.8 DHCP Snooping 295
- 4.12.12 ARP Inspection 300
- 4.13 MAC Address Table 302
- 4.14 LLDP 308
- Policies 315
- Port Policies Configuration 317
- 4.14.4 LLDP-MED Neighbor 318
- 4.14.5 Neighbor 322
- 4.14.6 Port Statistics 323
- Local Counters 324
- 4.15 Diagnostics 325
- 4.15.1 Ping 326
- 4.15.2 IPv6 Ping 327
- 4.15.3 Remote IP Ping Test 327
- 4.15.4 Cable Diagnostics 329
- 4.16 Power over Ethernet 330
- 4.16.2 System Configuration 332
- 4.16.3 Port Configuration 335
- 4.16.4 PoE Status 336
- 4.16.5 PoE Schedule 339
- 4.16.6 LLDP PoE Neighbours 342
- 4.17 Loop Protection 345
- 4.17.2 Status 346
- 4.18 RMON 348
- 4.18.2 RMON Alarm Status 350
- 4.18.4 RMON Event Status 352
- 4.18.6 RMON History Status 353
- 4.19 Ring 358
- 4.19.1 MEP Configuration 359
- 4.19.5 Ring Wizard 368
- 4.19.6 Ring Wizard Example: 370
- 5. COMMAND LINE INTERFACE 373
- 6. COMMAND LINE MODE 374
- 6.1 System Command 375
- [<offset>] 378
- 6.2 IP Command 385
- Example: 415
- 6.7 Security Command 419
- 6.9 Link Aggregation Command 503
- 6.11 LLDP Command 511
- 6.12 LLDP MED Command 517
- LLDP MED ECS 518
- LLDP MED Info 522
- 6.13 EEE Command 523
- 6.14 Thermal Command 525
- Thermal Configuration 526
- 6.15 PoE Command 527
- PoE Status 529
- EVC ECE Add 534
- EVC ECE Status 536
- MEP Config 539
- QoS QCL Add 566
- 6.20 Mirror Command 570
- 6.21 Configuration Command 572
- 6.22 Firmware Command 573
- Firmware Swap 574
- 6.23 UPnP Command 575
- 6.24 MVR Command 577
- 6.25 Voice VLAN Command 583
- 6.27 Loop Protect Command 597
- 6.28 IPMC Command 600
- 6.30 SMTP Command 618
- 6.31 DIDO Command 622
- 6.32 Show Command 627
- Show STP 634
- 7. SWITCH OPERATION 635
- 7.5 Auto-Negotiation 636
- 8. TROUBLE SHOOTING 637
- APPENDEX A 639
- APPENDEX B: GLOSSARY 641
- Aggregation 642
Inhaltsverzeichnis
User’s Manual of IGS-10020PT / IGS-10020HPT 1
User’s Manual of IGS-10020PT / IGS-10020HPT 10 IP DNS Proxy ...
User’s Manual of IGS-10020PT / IGS-10020HPT 100 SNMP v3: Set SNMP supported version 3. • Read Community Indicates the community read access str
User’s Manual of IGS-10020PT / IGS-10020HPT 101 be a dot or a dash. • Trap Destination IPv6 Address Indicates the SNMP trap destination IPv6 addre
User’s Manual of IGS-10020PT / IGS-10020HPT 102 4.3.3 SNMP System Information The switch system information is provided here. The SNMP System Infor
User’s Manual of IGS-10020PT / IGS-10020HPT 103 4.3.4 SNMPv3 Configuration 4.3.4.1 SNMPv3 Communities Configure SNMPv3 communities table on this pa
User’s Manual of IGS-10020PT / IGS-10020HPT 104 4.3.4.2 SNMPv3 Users Configure SNMPv3 users table on this page. The entry index keys are Engine ID
User’s Manual of IGS-10020PT / IGS-10020HPT 105 authentication protocol. SHA: An optional flag to indicate that this user using SHA authentica
User’s Manual of IGS-10020PT / IGS-10020HPT 106 The page includes the following fields: Object Description • Delete Check to delete the entry. It
User’s Manual of IGS-10020PT / IGS-10020HPT 107 • View Name A string identifying the view name that this entry should belong to. The allowed strin
User’s Manual of IGS-10020PT / IGS-10020HPT 108 • Group Name A string identifying the group name that this entry should belong to. The allowed str
User’s Manual of IGS-10020PT / IGS-10020HPT 109 4.4 Port Management Use the Port Menu to display or configure the Managed Switch's ports. This
User’s Manual of IGS-10020PT / IGS-10020HPT 11 VLAN Q-in-Q Mode ...
User’s Manual of IGS-10020PT / IGS-10020HPT 110 • Configured Link Speed Select any available link speed for the given switch port. Draw the menu b
User’s Manual of IGS-10020PT / IGS-10020HPT 111 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 112 4.4.3 Port Statistics Detail This page provides detailed traffic statistics for a specific switch p
User’s Manual of IGS-10020PT / IGS-10020HPT 113 Receive and Transmit Size Counters The number of received and transmitted (good and bad) packets sp
User’s Manual of IGS-10020PT / IGS-10020HPT 114 4.4.4 SFP Information You can check the physical or operational status of an SFP module via the SFP
User’s Manual of IGS-10020PT / IGS-10020HPT 115 • RX Power (dBm) Display the RX power of the current SFP module. The RX power value is gotten from
User’s Manual of IGS-10020PT / IGS-10020HPT 116 • Mirror Port Configuration The Port Mirror screen in Figure 4-4-6 appears. Figure 4-4-6: Mirror
User’s Manual of IGS-10020PT / IGS-10020HPT 117 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 118 Figure 4-5-1: Link Aggregation Topology The Link Aggregation Control Protocol (LACP) provides a s
User’s Manual of IGS-10020PT / IGS-10020HPT 119 avoid creating a data loop. It allows a maximum of 10 ports to be aggregated at the same time. The
User’s Manual of IGS-10020PT / IGS-10020HPT 12 Security Switch Access Clear ...
User’s Manual of IGS-10020PT / IGS-10020HPT 120 4.5.1 Static Aggregation This page is used to configure the Aggregation hash mode and the aggregati
User’s Manual of IGS-10020PT / IGS-10020HPT 121 Static Aggregation Group Configuration The Aggregation Group Configuration screen in Figure 4-5-3 a
User’s Manual of IGS-10020PT / IGS-10020HPT 122 4.5.2 LACP Configuration Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated P
User’s Manual of IGS-10020PT / IGS-10020HPT 123 • Role The Role shows the LACP activity status. The Active will transmit LACP packets each second;
User’s Manual of IGS-10020PT / IGS-10020HPT 124 Buttons : Click to refresh the page immediately. Auto-refresh : Automatic refresh occurs every 3 se
User’s Manual of IGS-10020PT / IGS-10020HPT 125 Buttons : Click to refresh the page immediately. Auto-refresh : Automatic refresh occurs every 3 se
User’s Manual of IGS-10020PT / IGS-10020HPT 126 4.6 VLAN 4.6.1 VLAN Overview A Virtual Local Area Network (VLAN) is a network topology configured a
User’s Manual of IGS-10020PT / IGS-10020HPT 127 4.6.2 IEEE 802.1Q VLAN In large networks, routers are used to isolate broadcast traffic for each
User’s Manual of IGS-10020PT / IGS-10020HPT 128 - Untagging - The act of stripping 802.1Q VLAN information out of the packet header. 802.1Q VL
User’s Manual of IGS-10020PT / IGS-10020HPT 129 Port VLAN ID Packets that are tagged (are carrying the 802.1Q VID information) can be transmitte
User’s Manual of IGS-10020PT / IGS-10020HPT 13 Security Switch RMON History Add ...
User’s Manual of IGS-10020PT / IGS-10020HPT 130 VLAN Classification When the switch receives a frame, it classifies the frame in one of two wa
User’s Manual of IGS-10020PT / IGS-10020HPT 131 • Current number of VLANs Display the current number of VLANs • VLAN Learning Display the VLAN le
User’s Manual of IGS-10020PT / IGS-10020HPT 132 QinQ tunneling is used to maintain customer-specific VLAN and Layer 2 protocol configurations even
User’s Manual of IGS-10020PT / IGS-10020HPT 133 VLAN Port Configuration The VLAN Port Configuration screen in Figure 4-6-2 appears. Figure 4-6-2 :
User’s Manual of IGS-10020PT / IGS-10020HPT 134 frames, untagged frames received on the port are discarded. By default, the field is set to All. •
User’s Manual of IGS-10020PT / IGS-10020HPT 135 4.6.5 VLAN Membership Adding Static Members to VLANs (VLAN Index) Use the VLAN Static Table to c
User’s Manual of IGS-10020PT / IGS-10020HPT 136 A VLAN without any port members on any stack unit will be deleted when you click "Save".
User’s Manual of IGS-10020PT / IGS-10020HPT 137 for all VLANs configured by a selected VLAN User (selection shall be allowed by a Combo Box). When
User’s Manual of IGS-10020PT / IGS-10020HPT 138 4.6.7 VLAN Port Status This page provides VLAN Port Staus. The VLAN Port Status screen in Figure 4-
User’s Manual of IGS-10020PT / IGS-10020HPT 139 4.6.8 Private VLAN The Private VLAN membership configurations for the switch can be monitored and m
User’s Manual of IGS-10020PT / IGS-10020HPT 14 Security Network ACL Status ...
User’s Manual of IGS-10020PT / IGS-10020HPT 140 : Click to undo any changes made locally and revert to previously saved values. Auto-refresh : Chec
User’s Manual of IGS-10020PT / IGS-10020HPT 141 Promiscuous ports — Ports from which traffic can be forwarded to all ports in the private VLAN —
User’s Manual of IGS-10020PT / IGS-10020HPT 142 4.6.10 VLAN Setting Example: - Separate VLAN - 802.1Q VLAN Trunk - Port Isolate 4.6.10.1 Two separ
User’s Manual of IGS-10020PT / IGS-10020HPT 143 1. While [PC-1] transmitting an untagged packet enters Port-1, the Managed Switch will tag it with
User’s Manual of IGS-10020PT / IGS-10020HPT 144 Figure 4-6-9: Add new VLAN group, assign VLAN members to VLAN 2 and VLAN 3 and remove specified po
User’s Manual of IGS-10020PT / IGS-10020HPT 145 4.6.10.2 VLAN Trunking between two 802.1Q aware Switch In most cases, it is used for “Uplink” to
User’s Manual of IGS-10020PT / IGS-10020HPT 146 1. Specify Port-8 to be the 802.1Q VLAN Trunk port. 2. Assign Port-8 to both VLAN 2 and VLAN 3 at
User’s Manual of IGS-10020PT / IGS-10020HPT 147 4.6.10.3 Port Isolate The diagram shows how the Managed Switch handles isolate and promiscuous port
User’s Manual of IGS-10020PT / IGS-10020HPT 148 Figure 4-6-16: Private VLAN Port Setting 4.6.11 MAC-based VLAN The MAC-based VLAN enties can be
User’s Manual of IGS-10020PT / IGS-10020HPT 149 : Click to save changes. : Click to undo any changes made locally and revert to previously saved va
User’s Manual of IGS-10020PT / IGS-10020HPT 15 STP BPDU Guard...
User’s Manual of IGS-10020PT / IGS-10020HPT 150 4.6.13 IP Subnet-based VLAN This page allows for adding, updating and deleting IP subnet-based VLAN
User’s Manual of IGS-10020PT / IGS-10020HPT 151 4.6.14 Protocol-based VLAN This page allows you to add new protocols to Group Name (unique for each
User’s Manual of IGS-10020PT / IGS-10020HPT 152 a.OUI: OUI (Organizationally Unique Identifier) is value in format of xx-xx-xx where each pair (xx)
User’s Manual of IGS-10020PT / IGS-10020HPT 153 The page includes the following fields: Object Description • Delete To delete a Group Name to VLA
User’s Manual of IGS-10020PT / IGS-10020HPT 154 4.7 Spanning Tree Protocol 4.7.1 Theory The Spanning Tree protocol can be used to detect and disabl
User’s Manual of IGS-10020PT / IGS-10020HPT 155 The port identifier of the transmitting port The switch sends BPDUs to communicate and construct
User’s Manual of IGS-10020PT / IGS-10020HPT 156 From disabled to blocking Figure 4-7-1: STP Port State Transitions You can modify each port sta
User’s Manual of IGS-10020PT / IGS-10020HPT 157 The following are the user-configurable STP parameters for the switch level: Parameter Descriptio
User’s Manual of IGS-10020PT / IGS-10020HPT 158 Port priority 128 Port cost 0 Bridge Priority 32,768 User-Changeable STA Parameters The switch’
User’s Manual of IGS-10020PT / IGS-10020HPT 159 A and so on. The broadcast packet will be passed indefinitely in a loop, potentially causing a netw
User’s Manual of IGS-10020PT / IGS-10020HPT 16 LLDP Interval ...
User’s Manual of IGS-10020PT / IGS-10020HPT 160 In this example, only the default STP values are used. Figure 4-7-3: After Applying the STA Ru
User’s Manual of IGS-10020PT / IGS-10020HPT 161 ‧ Extension – Multiple Spanning Tree Protocol (MSTP) : Defines an extension to RSTP to further dev
User’s Manual of IGS-10020PT / IGS-10020HPT 162 • Max Age The maximum age of the information transmitted by the Bridge when it is the Root Bridge.
User’s Manual of IGS-10020PT / IGS-10020HPT 163 4.7.3 Bridge Status This page provides a status overview for all STP bridge instances. The displaye
User’s Manual of IGS-10020PT / IGS-10020HPT 164 Figure 4-7-6 : STP CIST Port Configuration Page Screenshot The page includes the following fields
User’s Manual of IGS-10020PT / IGS-10020HPT 165 • operEdge (state flag) Operational flag describing whether the port is connecting directly to edg
User’s Manual of IGS-10020PT / IGS-10020HPT 166 By default, the system automatically detects the speed and duplex mode used on each port, and confi
User’s Manual of IGS-10020PT / IGS-10020HPT 167 4.7.5 MSTI Priorities This page allows the user to inspect the current STP MSTI bridge instance pri
User’s Manual of IGS-10020PT / IGS-10020HPT 168 4.7.6 MSTI Configuration This page allows the user to inspect the current STP MSTI bridge instance
User’s Manual of IGS-10020PT / IGS-10020HPT 169 The page includes the following fields: Configuration Identification Object Description • Configu
User’s Manual of IGS-10020PT / IGS-10020HPT 17 EVC Port Addr ...
User’s Manual of IGS-10020PT / IGS-10020HPT 170 The page includes the following fields: MSTI Port Configuration Object Description • Select MSTI
User’s Manual of IGS-10020PT / IGS-10020HPT 171 cost ports are chosen as forwarding ports in favor of higher path cost ports. Valid values are in t
User’s Manual of IGS-10020PT / IGS-10020HPT 172 AlternatePort BackupPort RootPort DesignatedPort • CIST State The current STP port sta
User’s Manual of IGS-10020PT / IGS-10020HPT 173 • TCN The number of (legacy) Topology Change Notification BPDU's received/transmitted on the
User’s Manual of IGS-10020PT / IGS-10020HPT 174 4.8 Multicast 4.8.1 IGMP Snooping The Internet Group Management Protocol (IGMP) lets host and route
User’s Manual of IGS-10020PT / IGS-10020HPT 175 Figure 4-8-2: Multicast Flooding Figure 4-8-3: IGMP Snooping Multicast Stream Control
User’s Manual of IGS-10020PT / IGS-10020HPT 176 IGMP Versions 1 and 2 Multicast groups allow members to join or leave at any time. IGMP provides th
User’s Manual of IGS-10020PT / IGS-10020HPT 177 message, and query messages that are specific to a given group. The states a computer will go throu
User’s Manual of IGS-10020PT / IGS-10020HPT 178 4.8.2 IGMP Snooping Configuration This page provides IGMP Snooping related configuration. The IGMP
User’s Manual of IGS-10020PT / IGS-10020HPT 179 • Router Port Specify which ports act as IGMP router ports. A router port is a port on the Etherne
User’s Manual of IGS-10020PT / IGS-10020HPT 18 6.19 Quality of Service Command ...
User’s Manual of IGS-10020PT / IGS-10020HPT 180 Figure 4-8-6: IGMP Snooping VLAN Configuration Page Screenshot The page includes the following fi
User’s Manual of IGS-10020PT / IGS-10020HPT 181 Buttons : Refreshes the displayed table starting from the "VLAN" input fields. : Updates
User’s Manual of IGS-10020PT / IGS-10020HPT 182 • Port The logical port for the settings. • Filtering Group The IP Multicast Group that will be f
User’s Manual of IGS-10020PT / IGS-10020HPT 183 4.8.5 IGMP Snooping Status This page provides IGMP Snooping status. The IGMP Snooping Status screen
User’s Manual of IGS-10020PT / IGS-10020HPT 184 4.8.6 IGMP Group Information Entries in the IGMP Group Table are shown on this page. The IGMP Group
User’s Manual of IGS-10020PT / IGS-10020HPT 185 4.8.7 IGMPv3 Information Entries in the IGMP SFM Information Table are shown on this page. The IGMP
User’s Manual of IGS-10020PT / IGS-10020HPT 186 : Updates the table, starting with the entry after the last entry currently displayed. 4.8.8 MLD Sn
User’s Manual of IGS-10020PT / IGS-10020HPT 187 join and leave messages to the router side. • Router Port Specify which ports act as router ports.
User’s Manual of IGS-10020PT / IGS-10020HPT 188 • MLD Snooping Enable Enable the per-VLAN MLD Snooping. Only up to 64 VLANs can be selected. • ML
User’s Manual of IGS-10020PT / IGS-10020HPT 189 4.8.10 MLD Snooping Port Group Filtering In certain switch applications, the administrator may want
User’s Manual of IGS-10020PT / IGS-10020HPT 19 6.20 Mirror Command ...
User’s Manual of IGS-10020PT / IGS-10020HPT 190 4.8.11 MLD Snooping Status This page provides MLD Snooping status. The IGMP Snooping Status screen
User’s Manual of IGS-10020PT / IGS-10020HPT 191 4.8.12 MLD Groups Information Entries in the MLD Group Table are shown on this page. The MLD Group
User’s Manual of IGS-10020PT / IGS-10020HPT 192 4.8.13 MLDv2 Information Entries in the MLD SFM Information Table are shown on this page. The MLD S
User’s Manual of IGS-10020PT / IGS-10020HPT 193 : Updates the table, starting with the entry after the last entry currently displayed. 4.8.14 M
User’s Manual of IGS-10020PT / IGS-10020HPT 194 The page includes the following fields: Object Description • MVR Mode Enable/Disable the Global M
User’s Manual of IGS-10020PT / IGS-10020HPT 195 ports. Receiver: Configure a port as a receiver port if it is a subscriber port and should only
User’s Manual of IGS-10020PT / IGS-10020HPT 196 • IGMPv2/MLDv1 Reports Received The number of Received IGMPv2 Joins and MLDv1 Reports, respectivel
User’s Manual of IGS-10020PT / IGS-10020HPT 197 • Port Members Ports under this group. Buttons Auto-refresh : Check this box to refresh the page
User’s Manual of IGS-10020PT / IGS-10020HPT 198 • Type Indicates the Type. It can be either Allow or Deny. • Hardware Filter / Switch Indicates w
User’s Manual of IGS-10020PT / IGS-10020HPT 199 4.9 Quality of Service 4.9.1 Understand QOS Quality of Service (QoS) is an advanced traffic pri
User’s Manual of IGS-10020PT / IGS-10020HPT 2 Trademarks Copyright © PLANET Technology Corp. 2013. Contents are subject to revise without prior not
User’s Manual of IGS-10020PT / IGS-10020HPT 20 Voice VLAN OUI Clear ...
User’s Manual of IGS-10020PT / IGS-10020HPT 200 4.9.2 Port Policing This page allows you to configure the Policer settings for all switch ports. Th
User’s Manual of IGS-10020PT / IGS-10020HPT 201 4.9.3 Port Shaping This page provides an overview of QoS Egress Port Shapers for all switch ports.
User’s Manual of IGS-10020PT / IGS-10020HPT 202 Figure 4-9-3: QoS Egress Port Schedule and Shapers Page Screenshot The page includes the followin
User’s Manual of IGS-10020PT / IGS-10020HPT 203 • Port Shaper Rate Controls the rate for the port shaper. The default value is 500. This value is
User’s Manual of IGS-10020PT / IGS-10020HPT 204 Controls the default QoS class, i.e., the QoS class for frames not classified in any other way. The
User’s Manual of IGS-10020PT / IGS-10020HPT 205 Figure 4-9-5 : QoS Ingress Port Tag Classification Page Screenshot The page includes the followin
User’s Manual of IGS-10020PT / IGS-10020HPT 206 4.9.5 Port Scheduler This page provides an overview of QoS Egress Port Schedulers for all switch po
User’s Manual of IGS-10020PT / IGS-10020HPT 207 Figure 4-9-7: QoS Egress Port Tag Remarking Page Screenshot The page includes the following field
User’s Manual of IGS-10020PT / IGS-10020HPT 208 The page includes the following fields: Object Description • Mode Controls the tag remarking mode
User’s Manual of IGS-10020PT / IGS-10020HPT 209 Figure 4-9-9 : QoS Port DSCP Configuration Page Screenshot The page includes the following fields:
User’s Manual of IGS-10020PT / IGS-10020HPT 21 IPMC SSM ...
User’s Manual of IGS-10020PT / IGS-10020HPT 210 4.9.8 DSCP-Based QoS This page allows you to configure the basic QoS DSCP based QoS Ingress Classif
User’s Manual of IGS-10020PT / IGS-10020HPT 211 • DPL The Configuration All with available values will assign to whole DSCP values. Drop Precedenc
User’s Manual of IGS-10020PT / IGS-10020HPT 212 The page includes the following fields: Object Description • DSCP Maximum numbers of supported DS
User’s Manual of IGS-10020PT / IGS-10020HPT 213 4.9.10 DSCP Classification This page allows you to map DSCP value to a QoS Class and DPL value. The
User’s Manual of IGS-10020PT / IGS-10020HPT 214 4.9.11 QoS Control List This page shows the QoS Control List (QCL), which is made up of the QCEs.
User’s Manual of IGS-10020PT / IGS-10020HPT 215 • DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any&a
User’s Manual of IGS-10020PT / IGS-10020HPT 216 The page includes the following fields: Object Description • Port Members Check the checkbox butt
User’s Manual of IGS-10020PT / IGS-10020HPT 217 DSCP Diffserv Code Point value(DSCP): It can be specific value, range of value or 'Any'.
User’s Manual of IGS-10020PT / IGS-10020HPT 218 Figure 4-9-15: QoS Control List Status Page Screenshot The page includes the following fields: Ob
User’s Manual of IGS-10020PT / IGS-10020HPT 219 Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3
User’s Manual of IGS-10020PT / IGS-10020HPT 22 SMTP Server ...
User’s Manual of IGS-10020PT / IGS-10020HPT 220 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 221 : Click to undo any changes made locally and revert to previously saved values. 4.9.15 QoS Statist
User’s Manual of IGS-10020PT / IGS-10020HPT 222 4.9.16 Voice VLAN Configuration The Voice VLAN feature enables voice traffic forwarding on the Vo
User’s Manual of IGS-10020PT / IGS-10020HPT 223 management VID, MVR VID, PVID etc. The allowed range is 1 to 4095. • Age Time Indicates the Voice
User’s Manual of IGS-10020PT / IGS-10020HPT 224 4.9.17 Voice VLAN OUI Table Configure VOICE VLAN OUI table on this page. The maximum entry number i
User’s Manual of IGS-10020PT / IGS-10020HPT 225 4.10 Access Control Lists ACL is an acronym for Access Control List. It is the list table of ACEs,
User’s Manual of IGS-10020PT / IGS-10020HPT 226 ARP: The ACE will match ARP/RARP frames. IPv4: The ACE will match all IPv4 frames. IPv
User’s Manual of IGS-10020PT / IGS-10020HPT 227 4.10.2 Access Control List Configuration This page shows the Access Control List (ACL), which is ma
User’s Manual of IGS-10020PT / IGS-10020HPT 228 • Rate Limiter Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Di
User’s Manual of IGS-10020PT / IGS-10020HPT 229 4.10.3 ACE Configuration Configure an ACE (Access Control Entry) on this page. An ACE consists of
User’s Manual of IGS-10020PT / IGS-10020HPT 23 Show MVR ...
User’s Manual of IGS-10020PT / IGS-10020HPT 230 • Policy Value When "Specific" is selected for the policy filter, you can enter a specif
User’s Manual of IGS-10020PT / IGS-10020HPT 231 MAC Parameters Object Description • SMAC Filter (Only displayed when the frame type is Etherne
User’s Manual of IGS-10020PT / IGS-10020HPT 232 priority. The allowed number range is 0 to 7. The value Any means that no tag priority is specified
User’s Manual of IGS-10020PT / IGS-10020HPT 233 • ARP SMAC Match Specify whether frames can hit the action according to their sender hardware addr
User’s Manual of IGS-10020PT / IGS-10020HPT 234 defining UDP parameters will apper. These fields are explained later in this help file. TCP: S
User’s Manual of IGS-10020PT / IGS-10020HPT 235 • DIP Filter Specify the destination IP filter for this ACE. Any: No destination IP filter is
User’s Manual of IGS-10020PT / IGS-10020HPT 236 Specific: If you want to filter a specific TCP/UDP source filter with this ACE, you can enter a
User’s Manual of IGS-10020PT / IGS-10020HPT 237 • TCP RST Specify the TCP "Reset the connection" (RST) value for this ACE. 0: TCP f
User’s Manual of IGS-10020PT / IGS-10020HPT 238 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 239 • Port Redirect Select which port frames are redirected on. The allowed values are Disabled or a s
User’s Manual of IGS-10020PT / IGS-10020HPT 24 1. INTRODUCTION PLANET IGS-10020PT / IGS-10020HPT Industrial 8-Port 10/100/1000T 802.3af/at PoE +
User’s Manual of IGS-10020PT / IGS-10020HPT 240 4.10.5 ACL Rate Limiter Configuration Configure the rate limiter for the ACL of the switch. The A
User’s Manual of IGS-10020PT / IGS-10020HPT 241 4.11 Authentication This section is to control the access of the Managed Switch, includes the user
User’s Manual of IGS-10020PT / IGS-10020HPT 242 is a valid RADIUS user can be used by anyone, and only the MD5-Challenge method is supported. The
User’s Manual of IGS-10020PT / IGS-10020HPT 243 Device Roles With 802.1X port-based authentication, the devices in the network have specific rol
User’s Manual of IGS-10020PT / IGS-10020HPT 244 Authentication Protocol (EAP) frames and interacting with the authentication server. When the switc
User’s Manual of IGS-10020PT / IGS-10020HPT 245 Figure 4-11-2: EAP Message Exchange Ports in Authorized and Unauthorized States The switch por
User’s Manual of IGS-10020PT / IGS-10020HPT 246 4.11.2 Authentication Configuration This page allows you to configure how a user is authenticated w
User’s Manual of IGS-10020PT / IGS-10020HPT 247 4.11.3 Network Access Server Configuration This page allows you to configure the IEEE 802.1X and MA
User’s Manual of IGS-10020PT / IGS-10020HPT 248 The page includes the following fields: System Configuration Object Description • Mode Indicates
User’s Manual of IGS-10020PT / IGS-10020HPT 249 the entry. • Hold Time This setting applies to the following modes, i.e. modes using the Port Secu
User’s Manual of IGS-10020PT / IGS-10020HPT 25 1.2 Product Description Environmentally Hardened Design The Industrial 8-Port Gigabit 802.3af/at P
User’s Manual of IGS-10020PT / IGS-10020HPT 250 timeout. The switch follows a set of rules for entering and leaving the Guest VLAN as listed below.
User’s Manual of IGS-10020PT / IGS-10020HPT 251 Force Unauthorized In this mode, the switch will send one EAPOL Failure frame when the port link co
User’s Manual of IGS-10020PT / IGS-10020HPT 252 other clients connected to the port (for instance through a hub) to piggy-back on the successfully
User’s Manual of IGS-10020PT / IGS-10020HPT 253 limited using the Port Security Limit Control functionality. MAC-based Auth. Unlike port-based 80
User’s Manual of IGS-10020PT / IGS-10020HPT 254 the RADIUS-assigned). This option is only available for single-client modes, i.e. • Port-based 802.
User’s Manual of IGS-10020PT / IGS-10020HPT 255 attributes must all be present at least once in the Access-Accept packet. - The switch looks for t
User’s Manual of IGS-10020PT / IGS-10020HPT 256 While in the Guest VLAN, the switch monitors the link for EAPOL frames, and if one such frame is re
User’s Manual of IGS-10020PT / IGS-10020HPT 257 4.11.4 Network Access Overview This page provides an overview of the current NAS port states for th
User’s Manual of IGS-10020PT / IGS-10020HPT 258 If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID. Read more a
User’s Manual of IGS-10020PT / IGS-10020HPT 259 Read more about Guest VLANs here. Port Counters Object Description • EAPOL Counters These supplic
User’s Manual of IGS-10020PT / IGS-10020HPT26PoE Schedule for Energy SavingUnder the trend of energy saving worldwide and contributing to environ
User’s Manual of IGS-10020PT / IGS-10020HPT 260 Rx Invalid Length dot1xAuthEapLengthErrorFramesRx The number of EAPOL frames that have been recei
User’s Manual of IGS-10020PT / IGS-10020HPT 261 server for this port (left-most table) or client (right-most table). Rx Other Requests dot1xAuthB
User’s Manual of IGS-10020PT / IGS-10020HPT 262 MAC-based: Counts all the backend server packets sent from the switch towards the backend server fo
User’s Manual of IGS-10020PT / IGS-10020HPT 263 Selected Counters Object Description • Selected Counters The Selected Counters table is visible w
User’s Manual of IGS-10020PT / IGS-10020HPT 264 : This button is available in the following modes: • Force Authorized • Force Unauthorized • Port-b
User’s Manual of IGS-10020PT / IGS-10020HPT 265 4.11.6 Authentication Server Configuration This page allows you to configure the Authentication Ser
User’s Manual of IGS-10020PT / IGS-10020HPT 266 The page includes the following fields: Port State These settings are common for all of the Authent
User’s Manual of IGS-10020PT / IGS-10020HPT 267 RADIUS Accounting Server Configuration The table has one row for each RADIUS Accounting Server and
User’s Manual of IGS-10020PT / IGS-10020HPT 268 4.11.7 RADIUS Overview This page provides an overview of the status of the RADIUS servers configura
User’s Manual of IGS-10020PT / IGS-10020HPT 269 expires. The number of seconds left before this occurs is displayed in parentheses. This state is o
User’s Manual of IGS-10020PT / IGS-10020HPT 27 Robust Layer 2 Feafures The IGS-10020PT/HPT can be programmed for advanced switch management functi
User’s Manual of IGS-10020PT / IGS-10020HPT 270 4.11.8 RADIUS Details This page provides detailed statistics for a particular RADIUS server. The
User’s Manual of IGS-10020PT / IGS-10020HPT 271 or invalid) received from the server. Rx Access Rejects radiusAuthClientExtAccessRejects The numb
User’s Manual of IGS-10020PT / IGS-10020HPT 272 reason. Tx Access Requests radiusAuthClientExtAccessRequests The number of RADIUS Access-Request p
User’s Manual of IGS-10020PT / IGS-10020HPT 273 State - Shows the state of the server. It takes one of the following values: Disabled: The select
User’s Manual of IGS-10020PT / IGS-10020HPT 274 an invalid length. Bad authenticators or or unknown types are not included as malformed access resp
User’s Manual of IGS-10020PT / IGS-10020HPT 275 the same server, send to a different server, or give up. A retry to the same server is counted as a
User’s Manual of IGS-10020PT / IGS-10020HPT 276 Buttons Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
User’s Manual of IGS-10020PT / IGS-10020HPT 277 2. Add New RADIUS Cleint on the Windows 2003 server Figure 4-11-11: Windows Server – Add New RADI
User’s Manual of IGS-10020PT / IGS-10020HPT 278 4. The shared secret key should be the same as the key configured on the Industrial Managed Switch
User’s Manual of IGS-10020PT / IGS-10020HPT 279 Figure 4-11-15: Windows 2003 AD Server Setting Path
User’s Manual of IGS-10020PT / IGS-10020HPT28Perfect Integrafion Solution for Outdoor IP PoE Camera and NVR SystemThe IGS-10020PT/HPT provides 8
User’s Manual of IGS-10020PT / IGS-10020HPT 280 7. Enter ” Active Directory Users and Computers”, create legal user data, the next, right-click a
User’s Manual of IGS-10020PT / IGS-10020HPT 281 Set the Ports Authenticate Status to “Force Authorized” if the port is connected to the RADIUS ser
User’s Manual of IGS-10020PT / IGS-10020HPT 282 4. Select “Authentication” tab. 5. Select “Enable network access control using IEEE 802.1X” to
User’s Manual of IGS-10020PT / IGS-10020HPT 283 9. Enter the user name, password and the logon domain that your account belongs. 10. Click “OK”
User’s Manual of IGS-10020PT / IGS-10020HPT 284 4.12 Security This section is to control the access of the Industrial Managed Switch, including the
User’s Manual of IGS-10020PT / IGS-10020HPT 285 Figure 4-12-1: Port Limit Control Configuration Overview Page Screenshot The page includes the fo
User’s Manual of IGS-10020PT / IGS-10020HPT 286 To understand why aging may be desired, consider the following scenario: Suppose an end-host is con
User’s Manual of IGS-10020PT / IGS-10020HPT 287 Shutdown: If Limit + 1 MAC addresses is seen on the port, shut down the port. This implies that all
User’s Manual of IGS-10020PT / IGS-10020HPT 288 4.12.2 Access Management Configure access management table on this page. The maximum entry number i
User’s Manual of IGS-10020PT / IGS-10020HPT 289 4.12.3 Access Management Statistics This page provides statistics for access management. The Access
User’s Manual of IGS-10020PT / IGS-10020HPT 29 1.4 Product Features Physical Port 8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 with IEEE 8
User’s Manual of IGS-10020PT / IGS-10020HPT 290 4.12.4 HTTPs Configure HTTPS on this page. The HTTPS Configuration screen in Figure 4-12-4 appears.
User’s Manual of IGS-10020PT / IGS-10020HPT 291 4.12.5 SSH Configure SSH on this page. This page shows the Port Security status. Port Security is a
User’s Manual of IGS-10020PT / IGS-10020HPT 292 4.12.6 Port Security Status This page shows the Port Security status. Port Security is a module wit
User’s Manual of IGS-10020PT / IGS-10020HPT 293 • Abbr A one-letter abbreviation of the user module. This is used in the Users column in the port
User’s Manual of IGS-10020PT / IGS-10020HPT 294 4.12.7 Port Security Detail This page shows the MAC addresses secured by the Port Security module.
User’s Manual of IGS-10020PT / IGS-10020HPT 295 4.12.8 DHCP Snooping DHCP Snooping is used to block intruder on the untrusted ports of DUT when it
User’s Manual of IGS-10020PT / IGS-10020HPT 296 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 297 • Rx and Tx Release The number of release (option 53 with value 7) packets received and transmitte
User’s Manual of IGS-10020PT / IGS-10020HPT 298 4.12.10 IP Source Guard Configuration IP Source Guard is a secure feature used to restrict IP traff
User’s Manual of IGS-10020PT / IGS-10020HPT 299 packets forwarding that are matched in static entries on the specific port. All means all ports w
User’s Manual of IGS-10020PT / IGS-10020HPT 3 TABLE OF CONTENTS 1. INTRODUCTION ...
User’s Manual of IGS-10020PT / IGS-10020HPT 30 High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous pa
User’s Manual of IGS-10020PT / IGS-10020HPT 300 4.12.12 ARP Inspection ARP Inspection is a secure feature. Several types of attacks can be launched
User’s Manual of IGS-10020PT / IGS-10020HPT 301 Buttons : Click to translate all dynamic entries to static entries. : Click to save changes. : Clic
User’s Manual of IGS-10020PT / IGS-10020HPT 302 4.13 MAC Address Table Switching of frames is based upon the DMAC address contained in the frame. T
User’s Manual of IGS-10020PT / IGS-10020HPT 303 The page includes the following fields: Aging Configuration By default, dynamic entries are removed
User’s Manual of IGS-10020PT / IGS-10020HPT 304 Buttons : Click to add a new entry. : Click to save changes. : Click to undo any changes made local
User’s Manual of IGS-10020PT / IGS-10020HPT 305 The page includes the following fields: Object Description • Type Indicates whether the entry is
User’s Manual of IGS-10020PT / IGS-10020HPT 306 closest next Dynamic ARP Inspection Table match. In addition, the two input fields will - upon a “R
User’s Manual of IGS-10020PT / IGS-10020HPT 307 page" input field. When first visited, the web page will show the first 20 entries from the be
User’s Manual of IGS-10020PT / IGS-10020HPT 308 4.14 LLDP 4.14.1 Link Layer Discovery Protocol Link Layer Discovery Protocol (LLDP) is used to di
User’s Manual of IGS-10020PT / IGS-10020HPT 309 The page includes the following fields: LLDP Parameters Object Description • Tx Interval The swit
User’s Manual of IGS-10020PT / IGS-10020HPT 31 Querier mode support IGMP Snooping port filtering MLD Snooping port filtering MVR (Multi
User’s Manual of IGS-10020PT / IGS-10020HPT 310 from neighbor units is analyzed. Tx only The switch will drop LLDP information received from n
User’s Manual of IGS-10020PT / IGS-10020HPT 311 by this TLV is described in IEEE 802.1AB. • Management Address Optional TLV: When checked the &quo
User’s Manual of IGS-10020PT / IGS-10020HPT 312 The page includes the following fields: Fast Start Repeat Count Object Description • Fast start r
User’s Manual of IGS-10020PT / IGS-10020HPT 313 It is possible to specify the direction to either North of the equator or South of the equator. •
User’s Manual of IGS-10020PT / IGS-10020HPT 314 • City district City division, borough, city district, ward, chou (Japan) • Block (Neighborhood)
User’s Manual of IGS-10020PT / IGS-10020HPT 315 Policies Network Policy Discovery enables the efficient discovery and diagnosis of mismatch issues
User’s Manual of IGS-10020PT / IGS-10020HPT 316 different policy for the voice signaling than for the voice media. This application type should not
User’s Manual of IGS-10020PT / IGS-10020HPT 317 • L2 Priority L2 Priority is the Layer 2 priority to be used for the specified application type. L
User’s Manual of IGS-10020PT / IGS-10020HPT 318 4.14.4 LLDP-MED Neighbor This page provides a status overview for all LLDP-MED neighbors. The dis
User’s Manual of IGS-10020PT / IGS-10020HPT 319 Within the LLDP-MED Endpoint Device category, the LLDP-MED scheme is broken into further Endpoint D
User’s Manual of IGS-10020PT / IGS-10020HPT 32 1.5 Product Specifications Product IGS-10020PT IGS-10020HPT Hardware Specification Copper Po
User’s Manual of IGS-10020PT / IGS-10020HPT 320 communication appliances that directly support the end user. Discovery services defined in this cla
User’s Manual of IGS-10020PT / IGS-10020HPT 321 Video Signaling - for use in network topologies that require a separate policy for the video signal
User’s Manual of IGS-10020PT / IGS-10020HPT 322 4.14.5 Neighbor This page provides a status overview for all LLDP neighbors. The displayed table
User’s Manual of IGS-10020PT / IGS-10020HPT 323 4.14.6 Port Statistics This page provides an overview of all LLDP traffic. Two types of counters ar
User’s Manual of IGS-10020PT / IGS-10020HPT 324 Local Counters The displayed table contains a row for each port. The columns hold the following inf
User’s Manual of IGS-10020PT / IGS-10020HPT 325 4.15 Diagnostics This section provide the Physical layer and IP layer network diagnostics tools for
User’s Manual of IGS-10020PT / IGS-10020HPT 326 4.15.1 Ping This page allows you to issue ICMP PING packets to troubleshoot IP connectivity issues.
User’s Manual of IGS-10020PT / IGS-10020HPT 327 4.15.2 IPv6 Ping This page allows you to issue ICMPv6 PING packets to troubleshoot IPv6 connectivit
User’s Manual of IGS-10020PT / IGS-10020HPT 328 Figure 4-15-3: Remote IP Ping Test Page Screenshot The page includes the following fields: Object
User’s Manual of IGS-10020PT / IGS-10020HPT 329 4.15.4 Cable Diagnostics This page is used for running the Cable Diagnostics. Press to run the diag
User’s Manual of IGS-10020PT / IGS-10020HPT 33 Dimensions (W x D x H) 152 x 107x 72mm Weight 1684g Power Requirements DC 48V Power Consumption 31
User’s Manual of IGS-10020PT / IGS-10020HPT 330 4.16 Power over Ethernet Providing up to 8 PoE, in-line power interfaces, the IGS-10020PT / IGS-100
User’s Manual of IGS-10020PT / IGS-10020HPT 331 10~12 Watts IP Surveillance Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera wit
User’s Manual of IGS-10020PT / IGS-10020HPT 332 4.16.2 System Configuration In a power over Ethernet system, operating power is applied from a powe
User’s Manual of IGS-10020PT / IGS-10020HPT 333 Consumption mode In this mode the ports are shut down when the actual power consumption for all
User’s Manual of IGS-10020PT / IGS-10020HPT 334 Priority mode: System offers PoE power according to per port priority setting when power consump
User’s Manual of IGS-10020PT / IGS-10020HPT 335 4.16.3 Port Configuration This section allows the user to inspect and configure the current PoE por
User’s Manual of IGS-10020PT / IGS-10020HPT 336 named Low, High and Critical. The priority is used in the case when total power consumption has bee
User’s Manual of IGS-10020PT / IGS-10020HPT 337 Figure 4-16-4: PoE Status Screenshot The page includes the following fields: Object Description •
User’s Manual of IGS-10020PT / IGS-10020HPT 338 • Port Status The Port Status shows the port's status. • AF / AT Mode Display per PoE port o
User’s Manual of IGS-10020PT / IGS-10020HPT 339 4.16.5 PoE Schedule The PoE Schedule of the IGS-10020PT / IGS-10020HPT features two advanced PD pow
User’s Manual of IGS-10020PT / IGS-10020HPT 34 QoS Traffic classification based, Strict priority and WRR 8-Level priority for switching - Port Numb
User’s Manual of IGS-10020PT / IGS-10020HPT 340 Powr over Ethernet Schedule Configuration This page allows the user to define PoE schedule. The
User’s Manual of IGS-10020PT / IGS-10020HPT 341 • End Min Allows user to set at what minute that best disables PoE function. • Reboot Enable Allo
User’s Manual of IGS-10020PT / IGS-10020HPT 342 4.16.6 LLDP PoE Neighbours This page provides a status overview for all LLDP PoE neighbors. The dis
User’s Manual of IGS-10020PT / IGS-10020HPT 343 4.16.7 PoE Alive Check Configuration The IGS-10020PT / IGS-10020HPT PoE Switch can be configured to
User’s Manual of IGS-10020PT / IGS-10020HPT 344 • Retry Count (1~5) This column allows user to set how many times system retries ping to PD. For e
User’s Manual of IGS-10020PT / IGS-10020HPT 345 4.17 Loop Protection This page allows the user to inspect the current Loop Protection configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 346 • Shutdown Time The period (in seconds) for which a port will be kept disabled in the event of a l
User’s Manual of IGS-10020PT / IGS-10020HPT 347 • Loops The number of loops detected on this port. • Status The current loop protection status of
User’s Manual of IGS-10020PT / IGS-10020HPT 348 4.18 RMON RMON is the most important expansion of the standard SNMP. RMON is a set of MIB definitio
User’s Manual of IGS-10020PT / IGS-10020HPT 349 framing characters. InUcastPkts: The number of uni-cast packets delivered to a higher-layer prot
User’s Manual of IGS-10020PT / IGS-10020HPT 35 IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet (IGS-10020HPT) RFC 768 UDP RFC 793
User’s Manual of IGS-10020PT / IGS-10020HPT 350 Buttons : Click to add a new community entry. : Click to save changes. : Click to undo any changes
User’s Manual of IGS-10020PT / IGS-10020HPT 351 Buttons Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
User’s Manual of IGS-10020PT / IGS-10020HPT 352 Buttons : Click to add a new community entry. : Click to save changes. : Click to undo any changes
User’s Manual of IGS-10020PT / IGS-10020HPT 353 4.18.5 RMON History Configuration Configure RMON History table on this page. The entry index key is
User’s Manual of IGS-10020PT / IGS-10020HPT 354 Figure 4-18-6: RMON history overview page screenshot The page includes the following fields: Obje
User’s Manual of IGS-10020PT / IGS-10020HPT 355 Buttons Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
User’s Manual of IGS-10020PT / IGS-10020HPT 356 Figure 4-18-8 appears. Figure 4-18-8: RMON Statistics Status page screenshot The page includes th
User’s Manual of IGS-10020PT / IGS-10020HPT 357 • 65~127 The total number of packets (including bad packets) received that were from 65 to 127 oct
User’s Manual of IGS-10020PT / IGS-10020HPT 358 4.19 Ring ITU-T G.8032 Ethernet Ring protection switching (ERPS) is a link layer protocol applied o
User’s Manual of IGS-10020PT / IGS-10020HPT 359 4.19.1 MEP Configuration The Maintenance Entity Point instances are configured here; screen in F
User’s Manual of IGS-10020PT / IGS-10020HPT 36 2. INSTALLATION 2.1 Hardware Descriptions The Managed Switch provides three different running speeds
User’s Manual of IGS-10020PT / IGS-10020HPT 360 • Domain Port: This is a MEP in the Port Domain. 'Flow Instance' is a Port. Esp: Future
User’s Manual of IGS-10020PT / IGS-10020HPT 361 Figure 4-19-2: Detail MEP configuration page screenshot The page includes the following fields: I
User’s Manual of IGS-10020PT / IGS-10020HPT 362 • Format This is the configuration of the two possible Maintenance Association Identifier formats.
User’s Manual of IGS-10020PT / IGS-10020HPT 363 Buttons : Click to add a new peer MEP. Functional Configuration Instance Data: Object Descriptio
User’s Manual of IGS-10020PT / IGS-10020HPT 364 in G.8032. • Type R-APS: APS PDU is transmitted as R-APS - this is for ERPS. L-APS: APS PDU is tra
User’s Manual of IGS-10020PT / IGS-10020HPT 365 • Port 1 SF MEP The Port 1 Signal Fail reporting MEP. As only one SF MEP is associated with interc
User’s Manual of IGS-10020PT / IGS-10020HPT 366 Figure 4-19-4: Ethernet Ring Protocol Switch Configuration page screenshot The page includes the
User’s Manual of IGS-10020PT / IGS-10020HPT 367 R-APS messages. The period of the guard timer can be configured in 10 ms steps between 10 ms and 2
User’s Manual of IGS-10020PT / IGS-10020HPT 368 • Protection State ERPS state according to State Transition Tables in G.8032. • Port 0 OK: State
User’s Manual of IGS-10020PT / IGS-10020HPT 369 Figure 4-19-5: Ring Wizard page screenshot The page includes the following fields: Object Descri
User’s Manual of IGS-10020PT / IGS-10020HPT 37 2.1.2 Front Panel Figure 2-1 & 2-2 shows the front panels of Industrial Managed Switch. Figur
User’s Manual of IGS-10020PT / IGS-10020HPT 370 4.19.6 Ring Wizard Example: Figure 4-19-6: Ring Example Diagram The above topology often occurs o
User’s Manual of IGS-10020PT / IGS-10020HPT 371 Setup steps Set ERPS Configuration on Switch 1 Connect PC to switch 1 directly; don’t connect to po
User’s Manual of IGS-10020PT / IGS-10020HPT 372 To avoid loop, please don’t connect switch 1, 2 & 3 together in the ring topology before co
User’s Manual of IGS-10020PT / IGS-10020HPT 373 5. COMMAND LINE INTERFACE 5.1 Accessing the CLI When accessing the management interface for the I
User’s Manual of IGS-10020PT / IGS-10020HPT 374 6. COMMAND LINE MODE The CLI groups all the commands in appropriate modes according to the nature o
User’s Manual of IGS-10020PT / IGS-10020HPT 375 6.1 System Command System Configuration Description: Show system configuration. Syntax: System C
User’s Manual of IGS-10020PT / IGS-10020HPT 376 Example: To display system log information: IGS-10020HPT:/>System log configuration System L
User’s Manual of IGS-10020PT / IGS-10020HPT 377 System Log Server Mode Description: Show or set the system log server mode. Syntax: System Log S
User’s Manual of IGS-10020PT / IGS-10020HPT 378 System Timezone Offset Description: Set or show the system timezone offset. Syntax: System Timezon
User’s Manual of IGS-10020PT / IGS-10020HPT 379 Default Setting: empty Example: To set log server address: IGS-10020HPT:/> log server addre
User’s Manual of IGS-10020PT / IGS-10020HPT 38 Reset Button At the left of the front panel, the reset button is designed for rebooting the Indus
User’s Manual of IGS-10020PT / IGS-10020HPT 380 Parameters: <location>: System location string. (1-255) Use 'clear' or
User’s Manual of IGS-10020PT / IGS-10020HPT 381 Syntax: System DST Mode [disable|recurring|non-recurring] Parameters: disable: Disable Daylight Sa
User’s Manual of IGS-10020PT / IGS-10020HPT 382 all : Show all levels (default) info : Show informations warning : Show warnings error :
User’s Manual of IGS-10020PT / IGS-10020HPT 383 System Reboot Description: Reboot the system. Syntax: System Reboot Example: To reboot device w
User’s Manual of IGS-10020PT / IGS-10020HPT 384 System Load Description: Show current CPU load: 100ms, 1s and 10s running average (in percent, zero
User’s Manual of IGS-10020PT / IGS-10020HPT 385 6.2 IP Command IP Configuration Description: Show IP configuration. Syntax: IP Configuration Ex
User’s Manual of IGS-10020PT / IGS-10020HPT 386 Parameters: enable : Enable or renew DHCP client disable: Disable DHCP client Default Setting: Dis
User’s Manual of IGS-10020PT / IGS-10020HPT 387 IP Ping Description: Ping IP address (ICMP echo). Syntax: IP Ping <ip_addr_string> [(Length
User’s Manual of IGS-10020PT / IGS-10020HPT 388 IP DNS Proxy Description: Set or show the IP DNS Proxy mode. Syntax: IP DNS_Proxy [enable|disable]
User’s Manual of IGS-10020PT / IGS-10020HPT 389 IPv6 Setup Description: Set or show the IPv6 setup. Syntax: IP IPv6 Setup [<ipv6_addr>] [<
User’s Manual of IGS-10020PT / IGS-10020HPT 39 Per 10/100/1000Mbps port with PoE LED Color Function 10/100/1000 LNK/ACT Green Lights to indica
User’s Manual of IGS-10020PT / IGS-10020HPT 390 Parameters: <ipv6_addr>: IPv6 address is in 128-bit records represented as eight fields of u
User’s Manual of IGS-10020PT / IGS-10020HPT 391 IP NTP Configuration Default Setting: IP NTP Configuration: ===================== NTP Mode : Disa
User’s Manual of IGS-10020PT / IGS-10020HPT 392 IP NTP Server Add Description: Add NTP server entry. Syntax: IP NTP Server Add <server_index>
User’s Manual of IGS-10020PT / IGS-10020HPT 393 IP NTP Server Delete Description: Delete NTP server entry. Syntax: IP NTP Server Delete <server
User’s Manual of IGS-10020PT / IGS-10020HPT 394 6.3 Port Management Command Port Configuration Description: Show port configuration. Syntax: Por
User’s Manual of IGS-10020PT / IGS-10020HPT 395 Parameters: <port_list>: Port list or 'all', default: All ports auto : Auto n
User’s Manual of IGS-10020PT / IGS-10020HPT 396 Port State Description: Set or show the port administrative state. Syntax: Port State [<port_li
User’s Manual of IGS-10020PT / IGS-10020HPT 397 Port Power Description: Set or show the port PHY power mode. Syntax: Port Power [<port_list>
User’s Manual of IGS-10020PT / IGS-10020HPT 398 Example: IGS-10020HPT:/>port excessive 1 restart Port Statistics Description: Show port stat
User’s Manual of IGS-10020PT / IGS-10020HPT 399 Port SFP Description: Show SFP port information. Syntax: Port SFP [<port_list>] Parameters:
User’s Manual of IGS-10020PT / IGS-10020HPT 4 4. WEB CONFIGURATION ...
User’s Manual of IGS-10020PT / IGS-10020HPT 40 2.1.4 Wiring the Power Input The 6-contact terminal block connector on the top panel of the Industri
User’s Manual of IGS-10020PT / IGS-10020HPT 400 6.4 MAC Address Table Command MAC Configuration Description: Show MAC address table configuration.
User’s Manual of IGS-10020PT / IGS-10020HPT 401 Add MAC address table entry. Syntax: MAC Add <mac_addr> <port_list> [<vid>] Para
User’s Manual of IGS-10020PT / IGS-10020HPT 402 Parameters: <mac_addr>: MAC address (xx-xx-xx-xx-xx-xx) <vid> : VLAN ID (1-4095), d
User’s Manual of IGS-10020PT / IGS-10020HPT 403 disable: Disable learning secure : Secure learning (default: Show learn mode) Default Setting: Auto
User’s Manual of IGS-10020PT / IGS-10020HPT 404 MAC Statistics Description: Show MAC address table statistics. Syntax: MAC Statistics [<port_li
User’s Manual of IGS-10020PT / IGS-10020HPT 405 6.5 VLAN Configuration Command VLAN Configuration Description: Show VLAN configuration. Syntax: VL
User’s Manual of IGS-10020PT / IGS-10020HPT 406 VLAV PVID Description: Set or show the port VLAN ID. Syntax: VLAN PVID [<port_list>] [<vid
User’s Manual of IGS-10020PT / IGS-10020HPT 407 IGS-10020HPT:/>vlan frametype 10 tagged VLAN Ingress Filter Description: Set or show the port
User’s Manual of IGS-10020PT / IGS-10020HPT 408 IEEE 802.1Q Example: Set VLAN mode in port base IGS-10020HPT:/>vlan mode portbased VLAN L
User’s Manual of IGS-10020PT / IGS-10020HPT 409 Parameters: <port_list>: Port list or 'all', default: All ports disable : Disab
User’s Manual of IGS-10020PT / IGS-10020HPT 41 2.1.5 Wiring the Fault Alarm Contact The fault alarm contacts are in the middle (3 & 4) of the t
User’s Manual of IGS-10020PT / IGS-10020HPT 410 Syntax: VLAN untagVID [<port_list>] [<untagvid>] Parameters: <port_list>: Port l
User’s Manual of IGS-10020PT / IGS-10020HPT 411 Parameters: <vid>|<name>: VLAN ID (1-4095) or VLAN Name <port_list> : Port list o
User’s Manual of IGS-10020PT / IGS-10020HPT 412 VLAN Forbidden Lookup Description: Lookup VLAN Forbidden port entry. Syntax: VLAN Forbidden Lookup
User’s Manual of IGS-10020PT / IGS-10020HPT 413 VID VLAN Name Ports ---- -------------------------------- ----- 1
User’s Manual of IGS-10020PT / IGS-10020HPT 414 VLAN Name Lookup Description: Show VLAN Name table. Syntax: VLAN Name Lookup [<name>] Param
User’s Manual of IGS-10020PT / IGS-10020HPT 415 Promiscous Example: Show VLAN configuration of port10 IGS-10020HPT:/>status 1 Port VLAN U
User’s Manual of IGS-10020PT / IGS-10020HPT 416 6.6 Private VLAN Configuration Command PVLAN Configuration Description: Show Private VLAN configura
User’s Manual of IGS-10020PT / IGS-10020HPT 417 PVLAN Add Description: Add or modify Private VLAN entry. Syntax: PVLAN Add <pvlan_id> [<p
User’s Manual of IGS-10020PT / IGS-10020HPT 418 PVLAN Lookup [<pvlan_id>] Parameters: <pvlan_id>: Private VLAN ID, default: Show all P
User’s Manual of IGS-10020PT / IGS-10020HPT 419 6.7 Security Command Security Switch User Configuration Description: Show users configuration. Syn
User’s Manual of IGS-10020PT / IGS-10020HPT 42 2.1.6 Wiring the Digital Input / Output The 6-contact terminal block connector on the rear panel of
User’s Manual of IGS-10020PT / IGS-10020HPT 420 Example: Add new user: username: test, password: test & privilege: 10 IGS-10020HPT:/>sec
User’s Manual of IGS-10020PT / IGS-10020HPT 421 Parameters: <group_name>: Privilege group name <cro> : Configuration read-only p
User’s Manual of IGS-10020PT / IGS-10020HPT 422 Client Authentication Method Local Authentication Fallback ------- ----------------------
User’s Manual of IGS-10020PT / IGS-10020HPT 423 Security Switch SSH Configuration Description: Show SSH configuration. Syntax: Security Switch SSH
User’s Manual of IGS-10020PT / IGS-10020HPT 424 Security Switch HTTPs Configuration Description: Show HTTPS configuration. Syntax: Security Switch
User’s Manual of IGS-10020PT / IGS-10020HPT 425 Security Switch HTTPs Redirect Description: Set or show the HTTPS redirect mode. Automatic redirect
User’s Manual of IGS-10020PT / IGS-10020HPT 426 Security Switch Access Mode Description: Set or show the access management mode. Syntax: Security
User’s Manual of IGS-10020PT / IGS-10020HPT 427 IGS-10020HPT:/>security switch access add 1 192.168.0.1 192.168.0.200 web Security Switch Acce
User’s Manual of IGS-10020PT / IGS-10020HPT 428 Syntax: Security Switch Access Delete <access_id> Parameters: <access_id>: entry index
User’s Manual of IGS-10020PT / IGS-10020HPT 429 Security Switch Access Statistics Description: Show or clear access management statistics. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 43 Figure 2-8 Wires DI0 and DI1 to Open Detector 4. There are two Digital Output groups for you to s
User’s Manual of IGS-10020PT / IGS-10020HPT 430 Parameters: enable : Enable SNMP disable: Disable SNMP (default: Show SNMP mode) Default Setting:
User’s Manual of IGS-10020PT / IGS-10020HPT 431 Syntax: Security Switch SNMP Read Community [<community>] Parameters: <community>: Com
User’s Manual of IGS-10020PT / IGS-10020HPT 432 Syntax: Security Switch SNMP Trap Mode [enable|disable] Parameters: enable : Enable SNMP traps dis
User’s Manual of IGS-10020PT / IGS-10020HPT 433 Security Switch SNMP Trap Community Description: Set or show the community string for SNMP traps.
User’s Manual of IGS-10020PT / IGS-10020HPT 434 Set or Show the SNMP trap destination IPv6 address. Syntax: Security Switch SNMP Trap IPv6 Destina
User’s Manual of IGS-10020PT / IGS-10020HPT 435 Security Switch SNMP Trap Link-up Description: Set or show the port link-up and link-down trap mode
User’s Manual of IGS-10020PT / IGS-10020HPT 436 IGS-10020HPT:/>security switch snmp trap inform mode disable Security Switch SNMP Trap Inform
User’s Manual of IGS-10020PT / IGS-10020HPT 437 IGS-10020HPT:/>security switch snmp trap inform retry times 10 Security Switch SNMP Trap Probe
User’s Manual of IGS-10020PT / IGS-10020HPT 438 Security Switch SNMP Trap Security Name Description: Set or show SNMP trap security name. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 439 Add or modify SNMPv3 community entry. The entry index key is <community>. Syntax: Security S
User’s Manual of IGS-10020PT / IGS-10020HPT 44 2.2 Install the Industrial Managed Switch This section describes how to install the Industrial Manag
User’s Manual of IGS-10020PT / IGS-10020HPT 440 Parameters: <index>: entry index (1-64) Example: Lookup SNMPv3 community entry IGS-10020H
User’s Manual of IGS-10020PT / IGS-10020HPT 441 IGS-10020HPT:/>security switch snmp user add 800007e5017f000003 admin_snmpv3 md5 12345678 des ab
User’s Manual of IGS-10020PT / IGS-10020HPT 442 87654321 12345678 Security Switch SNMP User Lookup Description: Lookup SNMPv3 user entry. Syntax
User’s Manual of IGS-10020PT / IGS-10020HPT 443 <group_name> : A string identifying the group name that this entry should belong to. The a
User’s Manual of IGS-10020PT / IGS-10020HPT 444 --- ----- -------------------------------- -------------------------------- 1 v1 public
User’s Manual of IGS-10020PT / IGS-10020HPT 445 Parameters: <index>: entry index (1-64) Example: Delete SNMPv3 view entry IGS-10020HPT:/&g
User’s Manual of IGS-10020PT / IGS-10020HPT 446 Parameters: <group_name> : A string identifying the group name that this entry should be
User’s Manual of IGS-10020PT / IGS-10020HPT 447 IGS-10020HPT:/>security switch snmp access delete 3 Security Switch SNMP Access Lookup Descrip
User’s Manual of IGS-10020PT / IGS-10020HPT 448 Security Switch RMON Statistics Delete Description: Delete RMON Statistics entry. The entry index k
User’s Manual of IGS-10020PT / IGS-10020HPT 449 Security Switch RMON History Delete Description: Delete RMON Hisotry entry. The entry index key is
User’s Manual of IGS-10020PT / IGS-10020HPT 45 2.2.2 DIN-Rail Mounting This section describes how to install the Industrial Managed Switch. There
User’s Manual of IGS-10020PT / IGS-10020HPT 450 .1.3.6.1.2.1.2.2.1.13.xxx – ifInDiscards .1.3.6.1.2.1.2.2.1.14.xxx – ifInErrors .1.3.6.1.2.1.2.2.1.
User’s Manual of IGS-10020PT / IGS-10020HPT 451 Syntax: Security Switch RMON Alarm Lookup [<alarm_id>] Parameters: <alarm_id>: Alarm I
User’s Manual of IGS-10020PT / IGS-10020HPT 452 Show RMON Event entries. Syntax: Security Switch RMON Event Lookup [<event_id>] Parameters:
User’s Manual of IGS-10020PT / IGS-10020HPT 453 10 ---- No users 0 Security Network Psec Port Description: Show MAC Addresses
User’s Manual of IGS-10020PT / IGS-10020HPT 454 IGS-10020HPT:/>security network limit configuration Port Security Limit Control Configuration:
User’s Manual of IGS-10020PT / IGS-10020HPT 455 Enable the limit mode IGS-10020HPT:/>security network limit mode enable Security Network Lim
User’s Manual of IGS-10020PT / IGS-10020HPT 456 Example: Set age time in 100sec. IGS-10020HPT:/>security network limit agetime 100 Securit
User’s Manual of IGS-10020PT / IGS-10020HPT 457 Default Setting: 4 Example: Set limit in 5 IGS-10020HPT:/>security network limit limit 1-10
User’s Manual of IGS-10020PT / IGS-10020HPT 458 Security Network Limit Reopen [<port_list>] Parameters: <port_list>: Port list or &apo
User’s Manual of IGS-10020PT / IGS-10020HPT 459 Allow Guest VLAN if EAPOL Frame Seen: Disabled Port Admin State Port State La
User’s Manual of IGS-10020PT / IGS-10020HPT 46 Step 3: Check if the DIN-Rail is tightly on the track. Please refer to following procedures to remo
User’s Manual of IGS-10020PT / IGS-10020HPT 460 authorized : Port access is allowed unauthorized: Port access is not allowed single : Single
User’s Manual of IGS-10020PT / IGS-10020HPT 461 Security Network NAS ReauthPeriod Description: Set or show either global enabledness (use the globa
User’s Manual of IGS-10020PT / IGS-10020HPT 462 Set the time between EAPOL retransmissions for 100sec. IGS-10020HPT:/>security network nas eap
User’s Manual of IGS-10020PT / IGS-10020HPT 463 Example: Set NAS hold time in 100sec IGS-10020HPT:/>security network nas holdtime 100 Secu
User’s Manual of IGS-10020PT / IGS-10020HPT 464 <port_list>: Select the per-port RADIUS-assigned VLAN setting (default: Show current per-port
User’s Manual of IGS-10020PT / IGS-10020HPT 465 Default Setting: Disable Example: Enable NAS guest VLAN IGS-10020HPT:/>security network nas
User’s Manual of IGS-10020PT / IGS-10020HPT 466 Example: Show 802.1X statistics in port 1 IGS-10020HPT:/>security network nas statistics 1 P
User’s Manual of IGS-10020PT / IGS-10020HPT 467 Parameters: <port_list> : Port list or 'all', default: All ports permit :
User’s Manual of IGS-10020PT / IGS-10020HPT 468 Security Network ACL Rate Description: Set or show the ACL rate limiter. Syntax: Security Network
User’s Manual of IGS-10020PT / IGS-10020HPT 469 Parameters: <ace_id> : ACE ID (1-256), default: Next available ID <ace_id_next> :
User’s Manual of IGS-10020PT / IGS-10020HPT 47 2.2.3 Wall Mount Plate Mounting To install the Industrial Managed Switch on the wall, please follow
User’s Manual of IGS-10020PT / IGS-10020HPT 470 Security Network ACL Delete Description: Delete ACE. Syntax: Security Network ACL Delete <ace_i
User’s Manual of IGS-10020PT / IGS-10020HPT 471 Example: Clear all ACL counters. IGS-10020HPT:/>security network acl clear Security Networ
User’s Manual of IGS-10020PT / IGS-10020HPT 472 DHCP Relay Configuration: ========================= DHCP Relay Mode : Disabled DHCP
User’s Manual of IGS-10020PT / IGS-10020HPT 473 Syntax: Security Network DHCP Relay Server [<ip_addr>] Parameters: <ip_addr>: IP addre
User’s Manual of IGS-10020PT / IGS-10020HPT 474 Security Network DHCP Relay Information Policy Description: Set or show the DHCP relay mode. When e
User’s Manual of IGS-10020PT / IGS-10020HPT 475 Security Network DHCP Snooping Configuration Description: Show DHCP snooping configuration. Syntax
User’s Manual of IGS-10020PT / IGS-10020HPT 476 Parameters: <port_list>: Port list or 'all', default: All ports trusted : Configure
User’s Manual of IGS-10020PT / IGS-10020HPT 477 Rx Lease Query: 0 Tx Lease Query: 0 Rx Lease Unassigned
User’s Manual of IGS-10020PT / IGS-10020HPT 478 Syntax: Security Network IP Source Guard Port Mode [<port_list>] [enable|disable] Parameters
User’s Manual of IGS-10020PT / IGS-10020HPT 479 Security Network IP Source Guard Entry Description: Add or delete IP source guard static entry. Sy
User’s Manual of IGS-10020PT / IGS-10020HPT 48 2.3 Cabling 10/100/1000Base-T and 100Base-FX / 1000Base-SX/LX All 10/100/1000Base-T ports come
User’s Manual of IGS-10020PT / IGS-10020HPT 480 Security Network IP Source Guard Translation Description: Translate IP source guard dynamic entries
User’s Manual of IGS-10020PT / IGS-10020HPT 481 IGS-10020HPT:/>security network arp inspection mode enable Security Network ARP Inspection Por
User’s Manual of IGS-10020PT / IGS-10020HPT 482 <allowed_ip> : IP address (a.b.c.d), IP address allowed for doing ARP request Example: A
User’s Manual of IGS-10020PT / IGS-10020HPT 483 Example: Show Auth configuration. IGS-10020HPT:/>security aaa configuration AAA Configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 484 5 Disabled 49 Security AAA Timeout Des
User’s Manual of IGS-10020PT / IGS-10020HPT 485 Set 1000sec for server dead time IGS-10020HPT:/>security aaa deadtime 1000 Security AAA RADI
User’s Manual of IGS-10020PT / IGS-10020HPT 486 The server index (1-5) (default: Show RADIUS accounting server configuration) enable : Enable
User’s Manual of IGS-10020PT / IGS-10020HPT 487 IGS-10020HPT:/>security aaa tacacs+ 1 enable 192.168.0.20 12345678 49 Security AAA Statistics
User’s Manual of IGS-10020PT / IGS-10020HPT 488 6.8 Spanning Tree Protocol Command STP Configuration Description: Show STP configuration. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 489 Example: Set the STP Bridge protocol version. IGS-10020HPT:/> stp version rstp STP Tx Hold
User’s Manual of IGS-10020PT / IGS-10020HPT 49 2.3.1 Installing the SFP Transceiver The sections describe how to insert an SFP transceiver into a
User’s Manual of IGS-10020PT / IGS-10020HPT 490 Set STP maximum hops in 25 IGS-10020HPT:/>stp maxhops 25 STP MaxAge Description: Set or show
User’s Manual of IGS-10020PT / IGS-10020HPT 491 IGS-10020HPT:/>stp fwddelay 25 STP CName Description: Set or Show MSTP configuration name and
User’s Manual of IGS-10020PT / IGS-10020HPT 492 Example: Set edge port BPDU filtering IGS-10020HPT:/>stp bpdufilter enable STP BPDU Guard
User’s Manual of IGS-10020PT / IGS-10020HPT 493 Example: Set STP recovery value in 30 sec. IGS-10020HPT:/>stp recovery 30 STP Status Descr
User’s Manual of IGS-10020PT / IGS-10020HPT 494 STP MSTI Priority Description: Set or show the bridge instance priority. Syntax: STP Msti Priority
User’s Manual of IGS-10020PT / IGS-10020HPT 495 STP MSTI Add Description: Add a VLAN to a MSTI. Syntax: STP Msti Add <msti> <vid> Par
User’s Manual of IGS-10020PT / IGS-10020HPT 496 STP Port Mode Description: Set or show the STP enabling for a port. Syntax: STP Port Mode [<por
User’s Manual of IGS-10020PT / IGS-10020HPT 497 IGS-10020HPT:/>stp port edge 1 enable STP Port AutoEdge Description: Set or show the STP autoE
User’s Manual of IGS-10020PT / IGS-10020HPT 498 Default: auto Example: Disable STP P2P function on port1 IGS-10020HPT:/>stp port p2p 1 disa
User’s Manual of IGS-10020PT / IGS-10020HPT 499 Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable
User’s Manual of IGS-10020PT / IGS-10020HPT 5 4.4 Port Management ...
User’s Manual of IGS-10020PT / IGS-10020HPT 50 MGB-TSX SFP-Port 1000Base-SX mini-GBIC module - 550m (-40~75 degrees C) MGB-TLX SFP-Port 1000Base-LX
User’s Manual of IGS-10020PT / IGS-10020HPT 500 Syntax: STP Port Statistics [<port_list>] [clear] Parameters: <port_list>: Port list or
User’s Manual of IGS-10020PT / IGS-10020HPT 501 <port_list>: Port list or 'all', default: All ports Default: auto STP MSTI Port C
User’s Manual of IGS-10020PT / IGS-10020HPT 502 <port_list>: Port list or 'all'. Port zero means aggregations. <priority> : S
User’s Manual of IGS-10020PT / IGS-10020HPT 503 6.9 Link Aggregation Command Aggregation Configuration Description: Show link aggregation configura
User’s Manual of IGS-10020PT / IGS-10020HPT 504 Example: Delete Group2 IGS-10020HPT:/>aggr delete 2 Aggregation Lookup Description: Lookup
User’s Manual of IGS-10020PT / IGS-10020HPT 505 Example: Disable SMAC mode IGS-10020HPT:/>Aggr mode smac disable
User’s Manual of IGS-10020PT / IGS-10020HPT 506 6.10 Link Aggregation Control Protocol Command LACP Configuration Description: Show LACP configurat
User’s Manual of IGS-10020PT / IGS-10020HPT 507 <port_list>: Port list or 'all', default: All ports enable : Enable LACP protocol d
User’s Manual of IGS-10020PT / IGS-10020HPT 508 Parameters: <port_list>: Port list or 'all', default: All ports <prio> :
User’s Manual of IGS-10020PT / IGS-10020HPT 509 Example: Set passive for port1~4 IGS-10020HPT:/>lacp role 1-4 passive LACP Status Descript
User’s Manual of IGS-10020PT / IGS-10020HPT 51 To connect to MFB-FX SFP transceiver, use the multi-mode fiber cable with one side being the male
User’s Manual of IGS-10020PT / IGS-10020HPT 510 Example: Show LACP statistics of port1~4 IGS-10020HPT:/>lacp statistics 1-4 Port Rx Frames
User’s Manual of IGS-10020PT / IGS-10020HPT 511 6.11 LLDP Command LLDP Configuration Description: Show LLDP configuration. Syntax: LLDP Configurat
User’s Manual of IGS-10020PT / IGS-10020HPT 512 Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable LLD
User’s Manual of IGS-10020PT / IGS-10020HPT 513 System capabilities: Enable Master's IP address: Enable Example: Disable descri
User’s Manual of IGS-10020PT / IGS-10020HPT 514 Example: Set LLDP hold value in 10 IGS-10020HPT:/>lldp hold 10 LLDP Delay Description: Set
User’s Manual of IGS-10020PT / IGS-10020HPT 515 Example: Set LLDP reinit delay value in 3 IGS-10020HPT:/>lldp reinit 3 LLDP Statistics Des
User’s Manual of IGS-10020PT / IGS-10020HPT 516 Syntax: LLDP Info [<port_list>] Parameters: <port_list>: Port list or 'all',
User’s Manual of IGS-10020PT / IGS-10020HPT 517 6.12 LLDP MED Command LLDP MED Configuration Description: Show LLDP-MED configuration. Syntax: LLD
User’s Manual of IGS-10020PT / IGS-10020HPT 518 Syntax: LLDPMED Civic [country|state|county|city|district|block|street|leading_street_direction|tra
User’s Manual of IGS-10020PT / IGS-10020HPT 519 Syntax: LLDPMED ecs [<ecs_value>] Parameters: <ecs_value>: lldpmed The value for the E
User’s Manual of IGS-10020PT / IGS-10020HPT 52 3. SWITCH MANAGEMENT This chapter explains the methods that you can use to configure management acce
User’s Manual of IGS-10020PT / IGS-10020HPT 520 visitors with their own IP Telephony handsets and other similar appliances supporting interactive v
User’s Manual of IGS-10020PT / IGS-10020HPT 521 Syntax: LLDPMED Coordinates [latitude|longitude|altitude] [north|south|west|east|meters|floor] [coo
User’s Manual of IGS-10020PT / IGS-10020HPT 522 Syntax: LLDPMED Fast [<count>] Parameters: <count>: The number of times the fast start
User’s Manual of IGS-10020PT / IGS-10020HPT 523 6.13 EEE Command EEE Configuration Description: Show eee configuration. Syntax: EEE Configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 524 disable: Disable EEE (default: Show eee mode) Default Setting: Disabled Example: Enable EEE m
User’s Manual of IGS-10020PT / IGS-10020HPT 525 6.14 Thermal Command Thermal Prio_temp Description: Set or show the temperature at which the ports
User’s Manual of IGS-10020PT / IGS-10020HPT 526 Thermal Configuration Description: Show thermal_protect configuration. Syntax: Thermal config
User’s Manual of IGS-10020PT / IGS-10020HPT 527 6.15 PoE Command PoE Configuration Description: Show PoE configuration. Syntax: PoE Configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 528 Parameters: <port_list>: Port list or 'all', default: All ports low : Set prior
User’s Manual of IGS-10020PT / IGS-10020HPT 529 Syntax: PoE Power_Supply [<supply_power>] Parameters: <supply_power>: PoE power for a
User’s Manual of IGS-10020PT / IGS-10020HPT 53 3.2 Management Access Overview The Industrial Managed Switch gives you the flexibility to access and
User’s Manual of IGS-10020PT / IGS-10020HPT 530 6.16 Ethernet Virtual Connections Command EVC Configuration Description: Show EVC configuration. S
User’s Manual of IGS-10020PT / IGS-10020HPT 531 EVC Port Addr Description: Set or show port address match mode. Syntax: EVC Port Addr [<port_li
User’s Manual of IGS-10020PT / IGS-10020HPT 532 enable : Enable policer disable : Disable policer <policer_mode>: Policer_mode:
User’s Manual of IGS-10020PT / IGS-10020HPT 533 Syntax: EVC Delete <evc_id> Parameters: <evc_id>: EVC ID (1-128) EVC Lookup Descript
User’s Manual of IGS-10020PT / IGS-10020HPT 534 Parameters: <port_list> : Port list or 'all', default: All ports <class_list>
User’s Manual of IGS-10020PT / IGS-10020HPT 535 <fragment> : IPv4 fragment: any|fragment|non-fragment <sport> : UDP/TCP source p
User’s Manual of IGS-10020PT / IGS-10020HPT 536 Syntax: EVC ECE Lookup [<ece_id>] Parameters: <ece_id>: ECE ID (1-128) EVC ECE Statu
User’s Manual of IGS-10020PT / IGS-10020HPT 537 6.17 Ethernet Protection Switching Command EPS Create Description: EPS create. Syntax: EPS create
User’s Manual of IGS-10020PT / IGS-10020HPT 538 unidir|bidir : Unidirectional or bidirectional switching w0s|w10s|w30s|w1m|w5
User’s Manual of IGS-10020PT / IGS-10020HPT 539 6.18 Maintainence entity End Point Command MEP Config Description: MEP instance configuration &apos
User’s Manual of IGS-10020PT / IGS-10020HPT 54 3.3 CLI Mode Management There are two ways for CLI mode management, one is remote telnet, and the ot
User’s Manual of IGS-10020PT / IGS-10020HPT 540 MEP Peer MEP Description: MEP Peer MEP id configuration. Syntax: MEP peer MEP [<inst>] [<
User’s Manual of IGS-10020PT / IGS-10020HPT 541 'flr' is the Frame Loss Ratio time interval. Syntax: MEP lm config [<inst>] [<p
User’s Manual of IGS-10020PT / IGS-10020HPT 542 'domport|domevc' is the client domain - must be EVC 'level' is the client MEG l
User’s Manual of IGS-10020PT / IGS-10020HPT 543 MEP LCK configuration 'prio' is the priority (PCP) of transmitted AIS frame '1s|1m&a
User’s Manual of IGS-10020PT / IGS-10020HPT 544 MEP Loop Back configuration 'set|clear' is set or clear of DEI of transmitted LBM frame &
User’s Manual of IGS-10020PT / IGS-10020HPT 545 'us|ns' calculation results are shown in micro or nano seconds 'keep|reset' the
User’s Manual of IGS-10020PT / IGS-10020HPT 546 Parameters: <inst> : Instance number set|clear : OAM DEI set/clear
User’s Manual of IGS-10020PT / IGS-10020HPT 547 Syntax: MEP lm clear <inst> Parameters: <inst> : Instance number MEP Link Tra
User’s Manual of IGS-10020PT / IGS-10020HPT 548 MEP Delay Measurement State Clear Description: MEP Delay Measurement state clear Syntax: MEP dm cl
User’s Manual of IGS-10020PT / IGS-10020HPT 549 6.19 Quality of Service Command QoS Configuration Description: Show QoS Configuration. Syntax: QoS
User’s Manual of IGS-10020PT / IGS-10020HPT 55 Figure 3-2: Remote Telnet Interface Main Screen of Industrial Managed Switch For more information
User’s Manual of IGS-10020PT / IGS-10020HPT 550 QoS Port Classification DPL Description: Set or show the default Drop Precedence Level. Syntax: Qo
User’s Manual of IGS-10020PT / IGS-10020HPT 551 QoS Port Classification DEI Description: Set or show the default DEI for an untagged frame. Syntax
User’s Manual of IGS-10020PT / IGS-10020HPT 552 IGS-10020HPT:/>qos Port Classification tag 1-10 enable QoS Port Classification Map Description
User’s Manual of IGS-10020PT / IGS-10020HPT 553 IGS-10020HPT:/>qos Port Classification dscp 1-10 enable QoS Port Policer Mode Description: Set
User’s Manual of IGS-10020PT / IGS-10020HPT 554 Example: Set the port policer rate in 1000 IGS-10020HPT:/>qos Port Policer Rate 1-10 1000
User’s Manual of IGS-10020PT / IGS-10020HPT 555 enable : Enable port policer flow control disable : Disable port policer flow control (defau
User’s Manual of IGS-10020PT / IGS-10020HPT 556 Default Setting: 500 QoS Port Scheduler Mode Description: Set or show the port scheduler mode. S
User’s Manual of IGS-10020PT / IGS-10020HPT 557 QoS Port QueueShaper Mode Description: Set or show the port queue shaper mode. Syntax: QoS Port Qu
User’s Manual of IGS-10020PT / IGS-10020HPT 558 Example: Set the port queue shaper rate in 1000 IGS-10020HPT:/>qos Port QueueShaper rate 1-1
User’s Manual of IGS-10020PT / IGS-10020HPT 559 default : Use default PCP/DEI values mapped : Use mapped versions of QoS class and DP level (d
User’s Manual of IGS-10020PT / IGS-10020HPT 56 3.4 Web Management The Industrial Managed Switch offers management features that allow users to mana
User’s Manual of IGS-10020PT / IGS-10020HPT 560 Parameters: <port_list>: Port list or 'all', default: All ports <dei> :
User’s Manual of IGS-10020PT / IGS-10020HPT 561 Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable
User’s Manual of IGS-10020PT / IGS-10020HPT 562 QoS Port DSCP EgressRemark Description: Set or show the port DSCP remarking mode. Syntax: QoS Port
User’s Manual of IGS-10020PT / IGS-10020HPT 563 QoS DSCP Translation Description: Set or show global ingress DSCP translation table. If port DSCP t
User’s Manual of IGS-10020PT / IGS-10020HPT 564 If port DSCP classification is 'selected', DSCP will be classified based on QoS class and
User’s Manual of IGS-10020PT / IGS-10020HPT 565 Parameters: enable : Enable unicast storm control disable : Disable unicast storm contro
User’s Manual of IGS-10020PT / IGS-10020HPT 566 Syntax: QoS Storm Broadcast [enable|disable] [<packet_rate>] Parameters: enable : Enab
User’s Manual of IGS-10020PT / IGS-10020HPT 567 <etype> : Ethernet Type: 0x600-0xFFFF or 'any' but excluding 0x800(IPv4) a
User’s Manual of IGS-10020PT / IGS-10020HPT 568 QoS QCL Lookup Description: Lookup QoS Control List. Syntax: QoS QCL Lookup [<qce_id>] Para
User’s Manual of IGS-10020PT / IGS-10020HPT 569 Syntax: QoS QCL refresh Parameters: combined|static|voice_vlan|conflicts: combined : Shows
User’s Manual of IGS-10020PT / IGS-10020HPT 57 3.5 SNMP-Based Network Management You can use an external SNMP-based application to configure and
User’s Manual of IGS-10020PT / IGS-10020HPT 570 6.20 Mirror Command Mirror Configuration Description: Show mirror configuration. Syntax: Mirror Co
User’s Manual of IGS-10020PT / IGS-10020HPT 571 Mirror Mode Description: Set or show the mirror mode. Syntax: Mirror Mode [<port_list>] [ena
User’s Manual of IGS-10020PT / IGS-10020HPT 572 6.21 Configuration Command Configuration Save Description: Save configuration to TFTP server. Synt
User’s Manual of IGS-10020PT / IGS-10020HPT 573 6.22 Firmware Command Firmware Load Description: Load new firmware from TFTP server. Syntax: Firmw
User’s Manual of IGS-10020PT / IGS-10020HPT 574 Firmware Swap Description: Activate the alternate firmware image.. Syntax: Firmware Swap
User’s Manual of IGS-10020PT / IGS-10020HPT 575 6.23 UPnP Command UPnP Configuration Description: Show UPnP configuration. Syntax: UPnP Configurat
User’s Manual of IGS-10020PT / IGS-10020HPT 576 IGS-10020HPT:/>upnp mode enable UPnP TTL Description: Set or show the TTL value of the IP head
User’s Manual of IGS-10020PT / IGS-10020HPT 577 6.24 MVR Command MVR Configuration Description: Show the MVR configuration. Syntax: MVR Configurat
User’s Manual of IGS-10020PT / IGS-10020HPT 578 Parameters: enable : Enable MVR mode disable : Disable MVR mode (default: Show MVR mode)
User’s Manual of IGS-10020PT / IGS-10020HPT 579 dynamic : Dynamic MVR mode compatible: Compatible MVR mode (default: Show MVR VLAN mode) MVR VL
User’s Manual of IGS-10020PT / IGS-10020HPT 58 3.6 PLANET Smart Discovery Utility For easily listing the Industrial Managed Switch in your Ethernet
User’s Manual of IGS-10020PT / IGS-10020HPT 580 MVR VLAN Channel Description: Set or show per MVR VLAN channel. Syntax: MVR VLAN Channel [<vid&
User’s Manual of IGS-10020PT / IGS-10020HPT 581 Syntax: MVR Immediate Leave [<port_list>] [enable|disable] Parameters: <<port_list>
User’s Manual of IGS-10020PT / IGS-10020HPT 582 Syntax: MVR SFM [<vid>] [<port_list>] Parameters: <vid> : VLAN ID (1-4095)
User’s Manual of IGS-10020PT / IGS-10020HPT 583 6.25 Voice VLAN Command Voice VLAN Configuration Description: Show Voice VLAN configuration. Synta
User’s Manual of IGS-10020PT / IGS-10020HPT 584 Port Mode Security Discovery Protocol ---- -------- -------- ------------------ 1 Dis
User’s Manual of IGS-10020PT / IGS-10020HPT 585 Voice VLAN ID Description: Set or show Voice VLAN ID. Syntax: Voice VLAN ID [<vid>] Paramet
User’s Manual of IGS-10020PT / IGS-10020HPT 586 Voice VLAN Traffic Class Description: Set or show Voice VLAN ID. Syntax: Voice VLAN Traffic Class
User’s Manual of IGS-10020PT / IGS-10020HPT 587 Voice VLAN OUI Delete Description: Delete Voice VLAN OUI entry. Modify OUI table will restart auto
User’s Manual of IGS-10020PT / IGS-10020HPT 588 Example: Lookup Voice VLAN OUI entry. IGS-10020HPT:/>voice vlan oui lookup Voice VLAN Port
User’s Manual of IGS-10020PT / IGS-10020HPT 589 Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable Voi
User’s Manual of IGS-10020PT / IGS-10020HPT 59 1. This utility shows all the necessary information from the devices, such as MAC Address, Device N
User’s Manual of IGS-10020PT / IGS-10020HPT 590 6.26 Ethernet Ring Protection Switching Command ERPS Command Description: Invoking an administrativ
User’s Manual of IGS-10020PT / IGS-10020HPT 591 <east_port> : protection group Port 0 <west_port> : protection group Port 1, Port 1 can
User’s Manual of IGS-10020PT / IGS-10020HPT 592 <group-id> : protection group-id for which vid belongs to. Syntax: Erps vlan add <vid>
User’s Manual of IGS-10020PT / IGS-10020HPT 593 <west_sf_mep> : SF mep id for Port 1 <east_raps_mep>: CC/RAPS mep id for Port 0 <we
User’s Manual of IGS-10020PT / IGS-10020HPT 594 ERPS RPL Neighbour Clear Description: make this node as non-neighbour for a protection group <gr
User’s Manual of IGS-10020PT / IGS-10020HPT 595 Parameters: <hold_timeout>: timer timeout values <group-id> : protection group id 1
User’s Manual of IGS-10020PT / IGS-10020HPT 596 ERPS Delete Description: deletion of a protection group <group-id> : protection group id
User’s Manual of IGS-10020PT / IGS-10020HPT 597 Parameters: <group-id> : protection group id 1 - 64 statistics|clear: ERPS statistics 6.
User’s Manual of IGS-10020PT / IGS-10020HPT 598 Default Setting: 5 Loop Protect Shutdown Description: Set or show the Loop Protection shutdown time
User’s Manual of IGS-10020PT / IGS-10020HPT 599 enable : Enable Loop Protection disable: Disable Loop Protection Loop Protect Port Action Descripti
User’s Manual of IGS-10020PT / IGS-10020HPT 6 4.7.8 Port Status ...
User’s Manual of IGS-10020PT / IGS-10020HPT 60 4. WEB CONFIGURATION This section introduces the configuration and functions of the Web-Based manage
User’s Manual of IGS-10020PT / IGS-10020HPT 600 Parameters: <port_list>: Port list or 'all', default: All ports 6.28 IPMC Command
User’s Manual of IGS-10020PT / IGS-10020HPT 601 IPMC Flooding Description: Set or show the IPMC unregistered addresses flooding operation. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 602 Default Setting: disable Example: Enable IGMP Leave Proxy IGS-10020HPT:/>ipmc leave proxy i
User’s Manual of IGS-10020PT / IGS-10020HPT 603 Parameters: mld|igmp : mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP range : SSM Range keyw
User’s Manual of IGS-10020PT / IGS-10020HPT 604 IPMC State Description: Set or show the IPMC snooping state for VLAN. Syntax: IPMC State [mld|igmp
User’s Manual of IGS-10020PT / IGS-10020HPT 605 Default Setting: disable Example: Enable IGMP querier for VLAN 1 IGS-10020HPT:/>ipmc querie
User’s Manual of IGS-10020PT / IGS-10020HPT 606 igmp: IPMC for IPv4 IGMP <port_list>: Port list or 'all', default: All ports enable
User’s Manual of IGS-10020PT / IGS-10020HPT 607 IPMC Filtering Description: Set or show the IPMC port group filtering list. Syntax: IPMC Filtering
User’s Manual of IGS-10020PT / IGS-10020HPT 608 IPMC Status Description: Show IPMC operational status, accordingly. Syntax: IPMC Status [mld|igmp]
User’s Manual of IGS-10020PT / IGS-10020HPT 609 IPMC Version Description: Show IPMC Versions. Syntax: IPMC Version [mld|igmp] [<vid>] Param
User’s Manual of IGS-10020PT / IGS-10020HPT 61 Logging on the Industrial Managed Switch 1. Use Internet Explorer 7.0 or above Web browser. Ente
User’s Manual of IGS-10020PT / IGS-10020HPT 610 Syntax: IPMC Parameter RV [mld|igmp] [<vid>] [ipmc_param_rv] Parameters: mld|igmp : mld
User’s Manual of IGS-10020PT / IGS-10020HPT 611 Parameters: mld|igmp : mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP <vid> :
User’s Manual of IGS-10020PT / IGS-10020HPT 612 mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP <vid> : VLAN ID (1-4095) or 'an
User’s Manual of IGS-10020PT / IGS-10020HPT 613 Syntax: VCL Macvlan Del <mac_addr> Parameters: <mac_addr> : MAC address (xx-xx-xx-xx-x
User’s Manual of IGS-10020PT / IGS-10020HPT 614 Syntax: VCL ProtoVlan Protocol Add Snap <oui>|rfc_1042|snap_8021h <pid> <group_id>
User’s Manual of IGS-10020PT / IGS-10020HPT 615 Parameters: <oui>|rfc_1042|snap_8021h: OUI value (Hexadecimal 00-00-00 to FF-FF-FF). <pid&
User’s Manual of IGS-10020PT / IGS-10020HPT 616 Parameters: <port_list>: Port list or 'all', default: All ports <group_id> :
User’s Manual of IGS-10020PT / IGS-10020HPT 617 VCL IP Subnet-based Vlan Delete Description: Delete VCL IP Subnet-based VLAN entry. Syntax: VCL IP
User’s Manual of IGS-10020PT / IGS-10020HPT 618 6.30 SMTP Command SMTP Configuration Description: Show SMTP configure. Syntax: SMTP Configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 619 Parameters: <server>: SMTP server address <port> : SMTP server port Default Setting:
User’s Manual of IGS-10020PT / IGS-10020HPT 62 Figure 4-1-3: Default Main Page Now, you can use the Web management interface to continue the swit
User’s Manual of IGS-10020PT / IGS-10020HPT 620 SMTP Auth_pass Description: Set or to show SMTP authentication password configure. Syntax: SMTP Au
User’s Manual of IGS-10020PT / IGS-10020HPT 621 Default Setting: Disable SMTP Mail to 1 Description: Set or show SMTP e-mail 1 to configure. Syn
User’s Manual of IGS-10020PT / IGS-10020HPT 622 6.31 DIDO Command DIDO DI Act Description: Set or show the system digital input0/1 action. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 623 DIDO DI Enable Description: Set or show the system digital input0/1. Syntax: DIDO Di_en [first|sec
User’s Manual of IGS-10020PT / IGS-10020HPT 624 enable : Enable digital input0/1 function disable : Disable digital input0/1 function (default: Se
User’s Manual of IGS-10020PT / IGS-10020HPT 625 DIDO DO Power Alarm Description: Set or show the system digital output0/1 power alarm. Syntax: DID
User’s Manual of IGS-10020PT / IGS-10020HPT 626 DIDO Fault Enable Description: Set or show the system fault alarm. Syntax: DIDO Fault_en [enable|d
User’s Manual of IGS-10020PT / IGS-10020HPT 627 6.32 Show Command Show Access Description: Show access management configuration. Syntax: Show acce
User’s Manual of IGS-10020PT / IGS-10020HPT 628 Syntax: Show auth Show DHCP Relay Description: Show DHCP relay configuration. Syntax: Show DHCP
User’s Manual of IGS-10020PT / IGS-10020HPT 629 Show IP Description: Show IP configuration. Syntax: Show ip Show LACP Description: Show LACP con
User’s Manual of IGS-10020PT / IGS-10020HPT 63 4.1 Main Web Page The Industrial Managed Switch provides a Web-based browser interface for configuri
User’s Manual of IGS-10020PT / IGS-10020HPT 630 Show Loop Protect Description: Show Loop Protection configuration. Syntax: Show Loop Protect Sho
User’s Manual of IGS-10020PT / IGS-10020HPT 631 Syntax: Show PoE Show Port Description: Show port configuration. Syntax: Show port Show Privil
User’s Manual of IGS-10020PT / IGS-10020HPT 632 Show SNMP Description: Show SNMP configuration. Syntax: Show SNMP Show SSH Description: Show SSH
User’s Manual of IGS-10020PT / IGS-10020HPT 633 Syntax: Show upnp Show Users Description: Show users configuration. Syntax: Show users Show VL
User’s Manual of IGS-10020PT / IGS-10020HPT 634 Show STP Description: Show STP Port configuration. Syntax: Show STP
User’s Manual of IGS-10020PT / IGS-10020HPT 635 7. SWITCH OPERATION 7.1 Address Table The Industrial Managed Switch is implemented with an address
User’s Manual of IGS-10020PT / IGS-10020HPT 636 7.5 Auto-Negotiation The STP ports on the Industrial Managed Switch have built-in “Auto-negotiation
User’s Manual of IGS-10020PT / IGS-10020HPT 637 8. TROUBLE SHOOTING This chapter contains information to help you solve problems. If the Industrial
User’s Manual of IGS-10020PT / IGS-10020HPT 638 While IP Address be changed or forgotten admin password – To reset the IP address to the defau
User’s Manual of IGS-10020PT / IGS-10020HPT 639 APPENDEX A A.1 Switch's Data RJ-45 Pin Assignments - 1000Mbps, 1000Base-T Implicit imp
User’s Manual of IGS-10020PT / IGS-10020HPT 64 Main Menu Using the onboard web agent, you can define system parameters, manage and control the In
User’s Manual of IGS-10020PT / IGS-10020HPT 640 The standard cable, RJ-45 pin assignment The standard RJ-45 receptacle/connector There are 8 wi
User’s Manual of IGS-10020PT / IGS-10020HPT 641 APPENDEX B: GLOSSARY A ACE ACE is an acronym for Access Control Entry. It describes access perm
User’s Manual of IGS-10020PT / IGS-10020HPT 642 Rate Limiter ID to the ACE(s) or ingress port(s). AES AES is an acronym for Advanced Encryption
User’s Manual of IGS-10020PT / IGS-10020HPT 643 transmitting CCM frames to a peer MEP. CCM CCM is an acronym for Continuity Check Message. It i
User’s Manual of IGS-10020PT / IGS-10020HPT 644 The DHCP option 82 enables a DHCP relay agent to insert specific information into a DHCP request pa
User’s Manual of IGS-10020PT / IGS-10020HPT 645 E EEE EEE is an abbreviation for Energy Efficient Ethernet defined in IEEE 802.3az. EPS EPS
User’s Manual of IGS-10020PT / IGS-10020HPT 646 HTTPS HTTPS is an acronym for Hypertext Transfer Protocol over Secure Socket Layer. It is used to
User’s Manual of IGS-10020PT / IGS-10020HPT 647 IMAP is the protocol that IMAP clients use to communicate with the servers, and SMTP is the protoco
User’s Manual of IGS-10020PT / IGS-10020HPT 648 The IEEE 802.2 Logical Link Control (LLC) protocol provides a link mechanism for upper layer protoc
User’s Manual of IGS-10020PT / IGS-10020HPT 649 MEP is an acronym for Maintenance Entity Endpoint and is an endpoint in a Maintenance Entity Group
User’s Manual of IGS-10020PT / IGS-10020HPT 65 4.2 System Use the System menu items to display and configure basic administrative details of the In
User’s Manual of IGS-10020PT / IGS-10020HPT 650 The NetBIOS giving each computer in the network both a NetBIOS name and an IP address corresponding
User’s Manual of IGS-10020PT / IGS-10020HPT 651 PING ping is a program that sends a series of packets over a network or the Internet to a specifi
User’s Manual of IGS-10020PT / IGS-10020HPT 652 Private VLAN In a private VLAN, PVLANs provide layer 2 isolation between ports within the same br
User’s Manual of IGS-10020PT / IGS-10020HPT 653 R RARP RARP is an acronym for Reverse Address Resolution Protocol. It is a protocol that is use
User’s Manual of IGS-10020PT / IGS-10020HPT 654 SMTP is an acronym for Simple Mail Transfer Protocol. It is a text-based protocol that uses the Tra
User’s Manual of IGS-10020PT / IGS-10020HPT 655 SyncE Is an abbreviation for Synchronous Ethernet. This functionality is used to make a network &ap
User’s Manual of IGS-10020PT / IGS-10020HPT 656 ToS is an acronym for Type of Service. It is implemented as the IPv4 ToS priority control. It is fu
User’s Manual of IGS-10020PT / IGS-10020HPT 657 It is Virtual LAN. It is a method to restrict communication between switch ports. VLANs can be used
User’s Manual of IGS-10020PT / IGS-10020HPT 658 necessarily with first generation wireless access points. WPA2 implements the full standard, but wi
User’s Manual of IGS-10020PT / IGS-10020HPT 66 configured SNTP Server, if any. • System Uptime The period of time the device has been operational.
User’s Manual of IGS-10020PT / IGS-10020HPT 67 address is zero, DHCP will retry. If DHCP server does not respond around 35 seconds and the configur
User’s Manual of IGS-10020PT / IGS-10020HPT 68 The page includes the following fields: Object Description • Auto Configuration Enable IPv6 auto
User’s Manual of IGS-10020PT / IGS-10020HPT 69 Figure 4-2-4: Users Configuration Page Screenshot The page includes the following fields: Object
User’s Manual of IGS-10020PT / IGS-10020HPT 7 4.9.15 QoS Statistics ...
User’s Manual of IGS-10020PT / IGS-10020HPT 70 The page includes the following fields: Object Description • User Name A string identifies the use
User’s Manual of IGS-10020PT / IGS-10020HPT 71 4.2.5 Privilege Levels This page provides an overview of the privilege levels. After setup is comple
User’s Manual of IGS-10020PT / IGS-10020HPT 72 The page includes the following fields: Object Description • Group Name The name identifies the pr
User’s Manual of IGS-10020PT / IGS-10020HPT 73 Figure 4-2-8: NTP Configuration Page Screenshot The page includes the following fields: Object De
User’s Manual of IGS-10020PT / IGS-10020HPT 74 4.2.7 Daylight Saving The Reboot page enables the device to be rebooted from a remote location. Once
User’s Manual of IGS-10020PT / IGS-10020HPT 75 Daylight Saving Time duration for single time configuration. ( Default : Disabled ) Daylight Saving
User’s Manual of IGS-10020PT / IGS-10020HPT 76 4.2.8 UPnP Configuring UPnP on this page. UPnP is an acronym for Universal Plug and Play. The goals
User’s Manual of IGS-10020PT / IGS-10020HPT 77 Figure 4-2-11: UPnP Devices shows on Windows My Network Places 4.2.9 DHCP Relay Configuring DHCP
User’s Manual of IGS-10020PT / IGS-10020HPT 78 standalone switch it always equals 0; in stackable switch it means switch ID). The parameter of &quo
User’s Manual of IGS-10020PT / IGS-10020HPT 79 message that already contains it. Keep: Keep the original relay information when receive a DHCP
User’s Manual of IGS-10020PT / IGS-10020HPT 8 4.13.4 Dynamic IP Source Guard Table ...
User’s Manual of IGS-10020PT / IGS-10020HPT 80 • Receive Bad Circuit ID The number of packets whose Circuit ID option did not match known circuit
User’s Manual of IGS-10020PT / IGS-10020HPT 81 Figure 4-2-14: CPU Load Page Screenshot Buttons Auto-refresh : Check this box to refresh the pa
User’s Manual of IGS-10020PT / IGS-10020HPT 82 4.2.12 System Log The switch system log information is provided here. The System Log screen in Figur
User’s Manual of IGS-10020PT / IGS-10020HPT 83 : Updates the system log entries, starting from the first available entry ID. : Updates the system l
User’s Manual of IGS-10020PT / IGS-10020HPT 84 4.2.14 Remote Syslog Configure remote syslog on this page. The Remote Syslog screen in Figure 4-2-17
User’s Manual of IGS-10020PT / IGS-10020HPT 85 4.2.15 SMTP Configuration Configuring SMTP Configuration on this page The SMTP Configuration scre
User’s Manual of IGS-10020PT / IGS-10020HPT 86 • Authentication Password It is for you to input your mail account password. • E-mail From It is f
User’s Manual of IGS-10020PT / IGS-10020HPT 87 Figure 4-2-19 Windows File Selection Menu Popup The page includes the following fields: Object Des
User’s Manual of IGS-10020PT / IGS-10020HPT 88 4.2.17 Fault Alarm The Fault Relay Alarm function provides the Power Failure and Port Link Down/Brok
User’s Manual of IGS-10020PT / IGS-10020HPT 89 4.2.18 EEE Power Reduction This page allows the user to configure the current EEE port settings. EEE
User’s Manual of IGS-10020PT / IGS-10020HPT 9 4.19.4 Ethernet Ring Protocol Switch Configuration ...
User’s Manual of IGS-10020PT / IGS-10020HPT 90 The page includes the following fields: Object Description • Port The switch port number of the lo
User’s Manual of IGS-10020PT / IGS-10020HPT 91 Figure 4-2-23: Software Successfully Loaded Notice Screen DO NOT Power OFF the Industrial Manag
User’s Manual of IGS-10020PT / IGS-10020HPT 92 Buttons : Click to upgrade firmware. DO NOT Power OFF the Industrial Managed Switch until the upda
User’s Manual of IGS-10020PT / IGS-10020HPT 93 configuration including syntax descriptions is included in the file. The file may then be modified u
User’s Manual of IGS-10020PT / IGS-10020HPT 94 4.2.22 Configuration Upload This function allows backup and reload the current configuration of the
User’s Manual of IGS-10020PT / IGS-10020HPT 95 4.2.23 Image Select This function provides dual image deposit in the Industrial Managed Switch, user
User’s Manual of IGS-10020PT / IGS-10020HPT 96 Figure 4-2-33: Image Select Page Screenshot After the system reboot, you can use the Alternate Ima
User’s Manual of IGS-10020PT / IGS-10020HPT 97 。 After the “Factory” button is pressed and rebooted, the system will be loaded default settings, e
User’s Manual of IGS-10020PT / IGS-10020HPT 98 4.3 Simple Network Management Protocol 4.3.1 SNMP Overview The Simple Network Management Protocol (S
User’s Manual of IGS-10020PT / IGS-10020HPT 99 SNMPv3 Groups Configure SNMPv3 groups table on this page. SNMPv3 Views Configure SNMPv3 view
Weitere Dokumente für Router Planet IGS-10020HPT
Verwandte Produkte und Handbücher für Router Planet IGS-10020HPT
(20 Seiten)
(2 Seiten)
(2 Seiten)
(22 Seiten)
(2 Seiten)
(45 Seiten)
(52 Seiten)
(2 Seiten)
(2 Seiten)
(24 Seiten)
(60 Seiten)
(2 Seiten)
(2 Seiten)
(2 Seiten)
(20 Seiten)
(2 Seiten)
(2 Seiten)
(24 Seiten)
(68 Seiten)
(75 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.810 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern