Planet POE-163 Bedienungsanleitung PDF herunterladen

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Content

Thank you for purchasing PLANET IEEE 802.3at High

Power over Ethernet Injector, POE-163 and POE-164.

Model LAN Port Speed PoE Standard PoE Budget

POE-163 10/100/1000Mbps

802.3at/af 30Watts

POE-164 10/100Mbps

Terms of “802.3at PoE Injector” in following

section of this User’s Manual means the POE-163

and POE-164.

Upon open the box of the IEEE 802.3at High Power

over Ethernet Injector and carefully unpack it. The

box should contain the following items:

 The IEEE 802.3at High Power over Ethernet

Injector x 1

 User’s Manual x 1

 AC Power Cord x 1

If any of these are missing or damaged, please

contact your dealer immediately, if possible, retain

the carton including the original packing material,

and use them against to repack the product in case

there is a need to return it to us for repair.

2. Product Features

■ Interface

❏ 2-Port RJ-45 interfaces

› 1-Port Data + Power output

› 1-Port Data input

❏ 1 AC 100-240V input power socket

■ Power over Ethernet

❏ High Power over Ethernet Mid-Span PSE

❏ IEEE 802.3at PoE compliant

❏ Backward compatible with IEEE 802.3af PD

device

❏ Support PoE Power up to 30 Watts for PoE port

❏ Auto-detect of PoE IEEE 802.3at/af equipment

and devices from being damaged by incorrect

installation

❏ Remote power feeding up to 100m

■ Hardware

❏ Plastic case

❏ LED indicators for Power LED and Active LED

(PoE ready / In-use)

■ Standard Compliance

❏ IEEE 802.3 10Base-T

❏ IEEE 802.3u 100Base-TX

❏ IEEE 802.3ab 1000Base-T (POE-163 only)

❏ IEEE 802.3at High Power over Ethernet

❏ IEEE 802.3af Power over Ethernet

❏ FCC Part 15 Class B, CE

Note

PSE (Power Sourcing Equipment) is

a device (switch, or hub for instance)

that will provide power in a PoE setup.

Maximum allowed continuous output

power per such device in IEEE 802.3af

is 15.4W, 30W in IEEE 802.3at.

PD (Powered Device) is a PoE-enabled

terminal by PSE and thus consumes

energy, such as IP Phones, network

cameras and Wireless access points, etc

3. Product Specication

Product POE-163 POE-164

Hardware Specication

Interface

“Data” Input

Port

1 x RJ-45 STP

“PoE (Data

+ Power)”

Output Port

1 x RJ-45 STP

AC Input

power socket

LED Indicator

System: Power x 1 (Green)

PoE Port: Active, PoE ready / In

Use x 1 (Green)

Network Cable

10Base-T: 2-Pair UTP Cat. 3, 4, 5,

up to 100m (328ft)

100Base-TX: 2-Pair UTP Cat. 3, 4,

5, up to 100m (328ft)

1000Base-T: 2-Pair UTP Cat. 5,

5e, 6 up to 100m (328ft)

(POE-163 only)

EIA/TIA- 568 100-ohm STP (100m)

Data Rate 10/100/1000Mbps 10/100Mbps

Dimension (W x D x H) 115 x 62.5 x 31 mm

Weight 177g

Unit Output Voltage DC 53V, 0.6A

Power Requirement 100-240V AC, 50/60Hz, 0.75A

Power Consumption 30 Watts max.

Number of device can

be powered

Operating Temperature 0 ~ 50 Degree C

Storage Temperature -10 ~ 70 Degree C

Operating Humidity

5 ~ 95%, Relative Humidity, non-

condensing

Storage Humidity

5 ~ 95%, Relative Humidity, non-

condensing

Power over Ethernet

PoE Standard

IEEE 802.3at High Power over

Ethernet / Mid-Span PSE

PoE Power Output DC 53V / 30 Watts

PoE Power Supply Type Mid-Span

Power Pin Assignment 4/5(+), 7/8(-)

Standards Conformance

Standards Compliance

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast

Ethernet

IEEE 802.3ab 1000Base-T Gigabit

Ethernet

(POE-163 only)

IEEE 802.3at High Power over

Ethernet

IEEE 802.3af Power over Ethernet

Regulation Compliance FCC Part 15 Class B, CE

4. Product Outlook

Figure 1: shows overviews of 802.3at PoE Injector.

Figure 1: POE-163 / POE-164 Outlook

LED Indicators

LED Color Function

POWER Green

Lights to indicate that the 802.3at PoE

Injector has power.

ACTIVE Green

Slow blinks to indicate the port is not

providing 53V DC in-line power.

Lights to indicate the port is providing

53V DC in-line power.

5. Hardware Installation

The following section describes the hardware

features of 802.3at PoE Injector. Before connecting

any network device to the 802.3at PoE Injector, read

this chapter carefully.

This POE-163 provides three different running

speeds – 10Mbps / 100Mbps / 1000Mbps and the

POE-164 provides two different running speeds

– 10Mbps / 100Mbps in the same device for

automatically distinguishes the speed of incoming

connection. Please refer to following sections for

detail information about IEEE 802.3at High Power

over Ethernet Injector.

5-1 Before Installation

Before your installation, it is recommended to check

your network environment. If there is any IEEE

802.3at devices need higher power to power on and

work normally, the 802.3at PoE Injector can provide

you a way to supply power for this Ethernet device

conveniently and easily. The 802.3at PoE Injector

equips with an AC power cord with 100-240V AC

input and injects DC 53V power into the pin of the

twisted pair cable (pair 4, 5 [+] and pair 7, 8 [-] ).

If there is very difcult to nd a power socket for

AC-DC Adapter of your non IEEE 802.3at networked

device, the 802.3at PoE Injector and POE-162S

can provide you a way to supply DC power for this

Ethernet device conveniently and easily.

Note

The 802.3at PoE Injector and POE-162S

can be installed in pair. However, the

use of third-party device is allowed if the

device complied with IEEE 802.3at Power

over Ethernet.

The 802.3at PoE Injector Installation

1. Connect the AC power cord to “AC slot” of

802.3at PoE Injector; the “POWER” LED will be

steady on.

2. Connect a standard network cable from Switch

/ workstation to “LAN” port of 802.3at PoE

Injector.

3. Connect the long cable that will be used to

connect to the remote device to the port “POE”.

4. Connect with IEEE 802.3at / 802.3af devices,

due to the capability of IEEE 802.3at / 802.3af

Power over Ethernet, the 802.3at PoE Injector

can directly connect with any IEEE 802.3at /

802.3af end-nodes such as PTZ (Pan, Tilt &

Zoom) network cameras, PTZ Speed Dome, color

touch- screen Voice over IP (VoIP) telephones,

multi- channel wireless LAN access points where

support IEEE 802.3at / 802.3af In-line Power over

Ethernet port. The screen in Figure 2 appears.

Switch

100 meters

PoE

Power

Data

PoE PTZ

IP Camera

802.3at PoE Injector

Power

Data

1000Base-T UTP

PoE

1000Base-T UTP with PoE

Power Line (AC)

Figure 2: Connection to IEEE 802.3at / 802.3af Devices

1 2

Inhaltsverzeichnis

Seite 1 - 5. Hardware Installation

- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 -- 8 -1. Package ContentThank you for purchasing PLANET IEEE 802.3at High Power over Ethernet Injector, POE-163 and

Seite 2 - - 12 - - 13

- 9 -- 10 -- 11 -- 12 - - 13 -The ACTIVE LED slow blinks to indicate the port is not providing 53V DC in-line power, once 802.3at PoE

Verwandte Modelle: POE-164

Kommentare zu diesen Handbüchern

Keine Kommentare

Planet POE-163 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Router Planet POE-163 herunter. PLANET POE-163 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: POE-164

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Planet POE-163