User’s Manual of GS-4210 Series 1. INTRODUCTION Thank you for purchasing PLANET GS-4210 Managed Switch series, which comes with multiple Gigabit Eth
User’s Manual of GS-4210 Series 4.3.9 EEE What is EEE EEE is a power saving option that reduces the power usage when there is low or no traffic utili
User’s Manual of GS-4210 Series Figure 4-3-19 EEE Enable Status Page Screenshot The page includes the following fields: Object Description Port
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port Select port number for this drop down list Fi
User’s Manual of GS-4210 Series 4.3.10.1 SFP Module Detail Status The SFP Module Detail Status screen in Figure 4-3-22 appears. Figure 4-3-22 SFP Mo
User’s Manual of GS-4210 Series 4.4 Link Aggregation Port Aggregation optimizes port usage by linking a group of ports together to form a single Link
User’s Manual of GS-4210 Series The Link Aggregation Control Protocol (LACP) provides a standardized means for exchanging information between Partner
User’s Manual of GS-4210 Series 4.4.1 LAG Setting This page allows configuring load balance algorithm configuration settings. The LAG Setting screens
User’s Manual of GS-4210 Series 4.4.2 LAG Management This page is used to configure the LAG management. The LAG Management screens in Figure 4-4-4 &a
User’s Manual of GS-4210 Series The page includes the following fields: Object Description LAG The LAG for the settings contained in the same row
User’s Manual of GS-4210 Series Auto-1000M - Set up 1000M Auto negotiation. Auto-10/100M – Set up 10/100M Auto negotiation. 10M – Set up 10M
User’s Manual of GS-4210 Series 1.2 Product Description Perfect Managed PoE+ Switch with Full PoE+ Power Budget PLANET GS-4210 PoE series is the new
User’s Manual of GS-4210 Series Duplex Display the current duplex mode Flow Control Config Display the current flow control configuration Fl
User’s Manual of GS-4210 Series 4.4.5 LACP Port Setting This page is used to configure the LACP port setting. The LACP Port Setting screens in Figure
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port Name The switch port number of the logical port
User’s Manual of GS-4210 Series Figure 4-4-13 LACP Information Page Screenshot The page includes the following fields: Object Description Trunk
User’s Manual of GS-4210 Series “Aggregation”, “Synchronization”, “Collecting”, “Distributing”, “Defaulted”, and “Expired”. The contents could be tr
User’s Manual of GS-4210 Series 4.5 VLAN 4.5.1 VLAN Overview A Virtual Local Area Network (VLAN) is a network topology configured according to a logi
User’s Manual of GS-4210 Series This section has the following items: Management VLAN Configures the management VLAN Create VLAN Creates the VL
User’s Manual of GS-4210 Series IEEE 802.1Q Standard IEEE 802.1Q (tagged) VLAN are implemented on the Switch. 802.1Q VLAN require tagging, which e
User’s Manual of GS-4210 Series The Ether Type and VLAN ID are inserted after the MAC source address, but before the original Ether Type/Length or Lo
User’s Manual of GS-4210 Series Assigning Ports to VLANs Before enabling VLANs for the switch, you must first assign each port to the VLAN group
User’s Manual of GS-4210 Series PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protect
User’s Manual of GS-4210 Series 4.5.3 Management VLAN Configure Management VLAN on this page. The screens in Figure 4-5-1 & Figure 4-5-2 appear
User’s Manual of GS-4210 Series 4.5.4 Create VLAN Create/delete VLAN on this page. The screens in Figure 4-5-3 & Figure 4-5-4 appear. Figure 4
User’s Manual of GS-4210 Series 4.5.5 Interface Settings This page is used for configuring the Managed Switch port VLAN. The VLAN per Port Configura
User’s Manual of GS-4210 Series 4096. The Managed Switch supports multiple VLAN tags and can therefore be used in MAN applications as a provider br
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port Select Select port number for this drop down list
User’s Manual of GS-4210 Series Figure 4-5-6 Edit Interface Setting Page Screenshot The page includes the following fields: Object Description
User’s Manual of GS-4210 Series 4.5.6 Port to VLAN Use the VLAN Static Table to configure port members for the selected VLAN index. This page allow
User’s Manual of GS-4210 Series port will be untagged, that is, not carry a tag and therefore not carry VLAN or CoS information. Note that an interfa
User’s Manual of GS-4210 Series 4.5.8 Protocol VLAN Group Setting The network devices required to support multiple protocols cannot be easily grouped
User’s Manual of GS-4210 Series Valid values for frame type ranges from 0x0600-0xfffe Buttons : Click to apply changes. Figure 4-5-10 Protocol VLA
User’s Manual of GS-4210 Series Robust Layer 2 Features The GS-4210 series can be programmed for advanced switch management functions such as dynamic
User’s Manual of GS-4210 Series 4.5.9 Protocol VLAN Port Setting This page allows you to map an already configured Group Name to a VLAN/port for the
User’s Manual of GS-4210 Series 4.5.10 GVRP Setting GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange VLAN information in
User’s Manual of GS-4210 Series The page includes the following fields: Object Description GVRP Controls whether GVRP is enabled or disabled on t
User’s Manual of GS-4210 Series Object Description GVRP Status Display the current GVRP status Join Timeout Display the current join timeout p
User’s Manual of GS-4210 Series Figure 4-5-16 GVRP Port Status Page Screenshot The page includes the following fields: Object Description Port
User’s Manual of GS-4210 Series 4.5.13 GVRP Statistics The GVRP Port Statistics and Error Statistics screens in Figure 4-5-18 & Figure 4-5-19 ap
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port The switch port number of the logical port. I
User’s Manual of GS-4210 Series 4.5.14 VLAN setting example: - Separate VLANs - 802.1Q VLAN Trunk 4.5.14.1 Two separate 802.1Q VLANs The diagram s
User’s Manual of GS-4210 Series 3. While the packet leaves Port-2, it will be stripped away its tag becoming an untagged packet. 4. While the packe
User’s Manual of GS-4210 Series 3. Assign Tagged/Untagged to each port: VLAN ID = 2: Port-1 & 2 = Untagged, Port-3 = Tagged, Port -4~6 = E
User’s Manual of GS-4210 Series Flexibility and Extension Solution The GS-4210 series provides Gigabit TP/SFP interfaces supporting 10/100/1000BASE-T
User’s Manual of GS-4210 Series 4.5.14.2 VLAN Trunking between two 802.1Q aware switches In most cases, they are used for “Uplink” to other switche
User’s Manual of GS-4210 Series 2. Assign VLAN mode and PVID to each port: Port-1,Port-2 and Port-3 : VLAN Mode = Hybrid, PVID=2 Port-4,Port-5 and P
User’s Manual of GS-4210 Series VLAN ID = 3: Port-4 & 5 = Untagged, Port -6 & 7= Tagged, Port-1~3 = Excluded. 142
User’s Manual of GS-4210 Series 4.6 Spanning Tree Protocol 4.6.1 Theory The Spanning Tree Protocol can be used to detect and disable network loops, a
User’s Manual of GS-4210 Series The port identifier of the transmitting port The switch sends BPDUs to communicate and construct the spanning-tree
User’s Manual of GS-4210 Series From disabled to blocking Figure 4-6-1 STP Port State Transitions You can modify each port state by using managem
User’s Manual of GS-4210 Series except by setting priority below) The Bridge Identifier consists of two parts: a 16-bit priority and a 48-bit Ether
User’s Manual of GS-4210 Series Hello Time – The Hello Time can be from 1 to 10 seconds. This is the interval between two transmissions of BPDU packe
User’s Manual of GS-4210 Series Figure 4-6-2 Before Applying the STA Rules In this example, only the default STP values are used. Figure 4-6-3 Aft
User’s Manual of GS-4210 Series The switch with the lowest Bridge ID (switch C) was elected the root bridge, and the ports were selected to give a hi
User’s Manual of GS-4210 Series 1.4 Product Features Physical Port 10/100/1000BASE-T Gigabit RJ45 copper 100/1000BASE-X mini-GBIC/SFP slots.
User’s Manual of GS-4210 Series 4.6.2 STP Global Settings This page allows you to configure STP system settings. The settings are used by all STP Bri
User’s Manual of GS-4210 Series RSTP-Operation and MSTP-Operation. Configuration Name Identifier used to identify the configuration currently bein
User’s Manual of GS-4210 Series 4.6.3 STP Port Setting This page allows you to configure per port STP settings. The STP Port Setting screens in Figur
User’s Manual of GS-4210 Series the appropriate BPDU format (RSTP or STP-compatible) to send on the selected interfaces. (Default: Disabled) Button
User’s Manual of GS-4210 Series Figure 4-6-7 STP Port Status Page Screenshot The page includes the following fields: Object Description Port Th
User’s Manual of GS-4210 Series 4.6.4 CIST Instance Setting This Page allows you to configure CIST instance settings. The CIST Instance Setting and I
User’s Manual of GS-4210 Series Tx Hold Count The number of BPDU's a bridge port can send per second. When exceeded, transmission of the ne
User’s Manual of GS-4210 Series 4.6.5 CIST Port Setting This page allows you to configure per port CIST priority and cost. The CIST Port Setting and
User’s Manual of GS-4210 Series Figure 4-6-11 CIST Port Status Page Screenshot The page includes the following fields: Object Description Port
User’s Manual of GS-4210 Series 4.6.6 MST Instance Configuration This page allows the user to configure MST Instance Configuration. The MST Instanc
User’s Manual of GS-4210 Series Maximum 8 trunk groups, up to 8 ports per trunk group Provides port mirror (many-to-1) Loop protection to
User’s Manual of GS-4210 Series VLAN List Display the current VLAN list VLAN Count Display the current VLAN count Priority Display the curre
User’s Manual of GS-4210 Series 4.6.7 MST Port Setting This page allows the user to inspect the current STP MSTI port configurations, and possibly ch
User’s Manual of GS-4210 Series Figure 4-6-16 MST Port Status Page Screenshot The page includes the following fields: Object Description MSTI
User’s Manual of GS-4210 Series 4.6.8 STP Statistics This page displays STP statistics. The STP statistics screen in Figure 4-6-17 appears. Figure 4
User’s Manual of GS-4210 Series 4.7 Multicast This section has the following items: Properties Configures multicast properties IGMP Snooping Co
User’s Manual of GS-4210 Series Figure 4-7-2 Properties Information Page Screenshot The page includes the following fields: Object Description
User’s Manual of GS-4210 Series Figure 4-7-3 Multicast Service Figure 4-7-4 Multicast Flooding 166
User’s Manual of GS-4210 Series Figure 4-7-5 IGMP Snooping Multicast Stream Control IGMP Versions 1 and 2 Multicast groups allow members to join or
User’s Manual of GS-4210 Series 0x16 Membership Report (version 2) 0x17 Leave a Group (version 2) 0x12 Membership Report (version 1) IGMP packets
User’s Manual of GS-4210 Series IGMP Querier – A router, or multicast-enabled switch, can periodically ask their hosts if they want to receive m
User’s Manual of GS-4210 Series Management IPv4 and IPv6 dual stack management Switch Management Interface - Web switch management - Teln
User’s Manual of GS-4210 Series Figure 4-7-8 IGMP Snooping Information Page Screenshot The page includes the following fields: Object Description
User’s Manual of GS-4210 Series Last Member Query Interval (sec) Display the current last member query interval Immediate Leave Display the cur
User’s Manual of GS-4210 Series The page includes the following fields: Object Description VLAN ID Display the current VLAN ID Querier State D
User’s Manual of GS-4210 Series : Click to add IGMP router port entry. Figure 4-7-13 IGMP Static Groups Page Screenshot The page includes the foll
User’s Manual of GS-4210 Series 4.7.2.5 IGMP Router Setting Depending on your network connections, IGMP snooping may not always be able to locate the
User’s Manual of GS-4210 Series Object Description VLAN ID Display the current VLAN ID Static Ports Display the current static ports Forbid
User’s Manual of GS-4210 Series Figure 4-7-19 Forbidden Router Table Page Screenshot The page includes the following fields: Object Description
User’s Manual of GS-4210 Series Port The switch port number of the logical port Select IGMP membership for each interface: Forbidden: Interface is
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Total RX Display current total RX Valid RX Display
User’s Manual of GS-4210 Series 4.7.4 MLD Snooping 4.7.4.1 MLD Setting This page provides MLD Snooping related configuration. Most of the settings ar
User’s Manual of GS-4210 Series 1.5 Product Specifications GS-4210-8P2S / GS-4210-8P2T2S Product GS-4210-8P2S GS-4210-8P2T2S Hardware Specificatio
User’s Manual of GS-4210 Series The page includes the following fields: Object Description MLD Snooping Status Display the current MLD snooping
User’s Manual of GS-4210 Series 4.7.4.2 MLD Static Group The MLD Static Group configuration screens in Figure 4-7-24 & Figure 4-7-25 appear. Fig
User’s Manual of GS-4210 Series 4.7.4.3 MLD Group Table This page provides MLD Group Table. The MLD Group Table screen in Figure 4-7-26 appears. Fig
User’s Manual of GS-4210 Series multicast router Type Sets the Router port type. The types of Router port as below: Static Forbid Static Ports
User’s Manual of GS-4210 Series 4.7.4.5 MLD Router Table This page provides Router Table. The Dynamic, Static and Forbidden Router Table screens in F
User’s Manual of GS-4210 Series The page includes the following fields: Object Description VLAN ID Display the current VLAN ID Port Mask Disp
User’s Manual of GS-4210 Series Buttons : Click to apply changes. 4.7.5 MLD Snooping Statics This page provides MLD Snooping Statics. The MLD Snoop
User’s Manual of GS-4210 Series Special Group Query RX Display current special group query RX Special Group & Source Query RX Display curre
User’s Manual of GS-4210 Series 4.7.6 Multicast Throttling Setting Multicast throttling sets a maximum number of multicast groups that a port can joi
User’s Manual of GS-4210 Series Figure 4-7-35 IGMP Port Max Groups Information Page Screenshot The page includes the following fields: Object Desc
User’s Manual of GS-4210 Series PoE Power Budget 120 watts (max.) @ 25 degrees C 100 watts (max.) @ 50 degrees C 240 watts (max.) @ 25 degrees C
User’s Manual of GS-4210 Series 4.7.7.1 Multicast Profile Setting The Add Profile and Profile Status screens in Figure 4-7-36 & Figure 4-7-37 app
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Index Display the current index IP Type Display the
User’s Manual of GS-4210 Series Figure 4-7-39 Port Filter Status Page Screenshot The page includes the following fields: Object Description Por
User’s Manual of GS-4210 Series Figure 4-7-41 Port Filter Status Page Screenshot The page includes the following fields: Object Description Por
User’s Manual of GS-4210 Series 4.8 Quality of Service 4.8.1 Understanding QoS Quality of Service (QoS) is an advanced traffic prioritization fea
User’s Manual of GS-4210 Series 4.8.2 General 4.8.2.1 QoS Properties The QoS Global Setting and Information screen in Figure 4-8-1 & Figure 4-8
User’s Manual of GS-4210 Series 4.8.2.2 QoS Port Settings The QoS Port Settings and Status screen in Figure 4-8-2 & Figure 4-8-3 appear. Figure
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port The switch port number of the logical port CoS
User’s Manual of GS-4210 Series Buttons : Click to apply changes. Figure 4-8-5 Queue Information Page Screenshot The page includes the following f
User’s Manual of GS-4210 Series Buttons : Click to apply changes. CoS Mapping Figure 4-8-7 CoS Mapping Page Screenshot The page includes the fol
User’s Manual of GS-4210 Series Trademarks Copyright © PLANET Technology Corp. 2015. Contents are subject to revision without prior notice. PLANET
User’s Manual of GS-4210 Series System log LLDP protocol SNTP Secure Management Interfaces SSH, SSL, SNMP v3 SNMP MIBs RFC 1213 MIB-II RFC 12
User’s Manual of GS-4210 Series 4.8.2.5 DSCP Mapping The DSCP to Queue and Queue to DSCP Mapping screens in Figure 4-8-8 & Figure 4-8-9 appear.
User’s Manual of GS-4210 Series Figure 4-8-9 DSCP Mapping Page Screenshot The page includes the following fields: Object Description DSCP Displ
User’s Manual of GS-4210 Series Object Description Queue Select Queue value for this drop down list IP Precedence Select IP Precedence value f
User’s Manual of GS-4210 Series 4.8.3 QoS Basic Mode 4.8.3.1 Global Settings The Basic Mode Global Settings and QoS Information screen in Figure 4-8-
User’s Manual of GS-4210 Series 4.8.3.2 Port Settings The QoS Port Setting and Status screen in Figure 4-8-14 & Figure 4-8-15 appear. Figure 4-8
User’s Manual of GS-4210 Series 4.8.4 Rate Limit Configure the switch port rate limit for the switch port on this page. 4.8.4.1 Ingress Bandwidth
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port The switch port number of the logical port Ing
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port The switch port number of the logical port Egr
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Queue ID Display the current queue ID Rate Limit (K
User’s Manual of GS-4210 Series 4.8.5.2 Properties The Voice VLAN feature enables voice traffic to forward on the Voice VLAN, and then the switch can
User’s Manual of GS-4210 Series GS-4210-24P4C / GS-4210-24PL4C Product GS-4210-24P4C GS-4210-24PL4C Hardware Specifications Copper Ports 28 x 10
User’s Manual of GS-4210 Series Figure 4-8-23 Properites Page Screenshot The page includes the following fields: Object Description Voice VLAN
User’s Manual of GS-4210 Series Object Description OUI Address hony OUI address is a globally unique identifier assigned to a vendor by be 6 cha
User’s Manual of GS-4210 Series 4.8.5.4 Telephony OUI Port Setting The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then th
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port The switch port number of the logical port St
User’s Manual of GS-4210 Series 4.9 Security This section is to control the access of the Managed Switch, including the user access and management
User’s Manual of GS-4210 Series Remote Authentication Dial-in User Service (RADIUS) Terminal Access Controller Access Control System Plus (T
User’s Manual of GS-4210 Series Client—the device (workstation) that requests access to the LAN and switch services and responds to requests from
User’s Manual of GS-4210 Series The specific exchange of EAP frames depends on the authentication method being used. “Figure 4-9-2” shows a message e
User’s Manual of GS-4210 Series 4.9.1.2 802.1X Setting This page allows you to configure the IEEE 802.1X authentication system. The IEEE 802.1X stand
User’s Manual of GS-4210 Series 4.9.1.3 802.1X Port Setting This page allows you to configure the IEEE 802.1X Port Setting. The 802.1X Port Setting s
User’s Manual of GS-4210 Series Port Mirroring TX / RX / both Many-to-1 monitor VLAN 802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 V
User’s Manual of GS-4210 Series switch port or if a supplicant is no longer attached. Reauthentication Period Determines the period, in seconds,
User’s Manual of GS-4210 Series Reauthentication Period Display the current reauthentication period. Quiet Period Display the current quiet per
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Guest VLAN ID This is the value that a port's Por
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port Name The switch port number of the logical port
User’s Manual of GS-4210 Series 4.9.2 RADIUS Server This page is to configure the RADIUS server connection session parameters. The RADIUS Settings
User’s Manual of GS-4210 Series Figure 4-9-11 New Radius Server Page Screenshot The page includes the following fields: Object Description Serv
User’s Manual of GS-4210 Series Server Priority Set the server priority Dead Time The Dead Time, which can be set to a number between 0 and 360
User’s Manual of GS-4210 Series 4.9.3 TACACS+ Server This page is to configure the RADIUS server connection session parameters. The RADIUS Settings
User’s Manual of GS-4210 Series Object Description Server Definition Set the server definition Server IP Address of the TACACS+ server IP/name
User’s Manual of GS-4210 Series 4.9.4 AAA Authentication, authorization, and accounting (AAA) provides a framework for configuring access control on
User’s Manual of GS-4210 Series RFC 2674 Bridge MIB Extensions RFC 2737 Entity MIB (Version 2) RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface
User’s Manual of GS-4210 Series 4.9.4.1 Login List This page is to login list parameters. The authentication list screen in Figure 4-9-17 & Figur
User’s Manual of GS-4210 Series 4.9.4.2 Enable List This page is to login list parameters. The authentication list screens in Figure 4-9-19 & Fig
User’s Manual of GS-4210 Series 4.9.5 Access This section is to control the access of the Managed Switch, including the different access methods – Te
User’s Manual of GS-4210 Series Figure 4-9-21 Telnet Information Page Screenshot The page includes the following fields: Object Description Tel
User’s Manual of GS-4210 Series Figure 4-9-23 SSH Settings Page Screenshot The page includes the following fields: Object Description SSH Servi
User’s Manual of GS-4210 Series The page includes the following fields: Object Description SSH Service Display the current SSH service Login A
User’s Manual of GS-4210 Series Figure 4-9-26 HTTP Information Page Screenshot The page includes the following fields: Object Description HTTP
User’s Manual of GS-4210 Series Figure 4-9-28 HTTPs Information Page Screenshot The page includes the following fields: Object Description HTTP
User’s Manual of GS-4210 Series Management Method Indicates the host can access the switch from HTTP/HTTPs/telnet/SSH/SNMP/All interface that the
User’s Manual of GS-4210 Series 4.9.6.2 Access Rules The access profile screens in Figure 4-9-31 & Figure 4-9-32 appear. Figure 4-9-31 Access Pr
User’s Manual of GS-4210 Series GS-4210-48T4S Product GS-4210-48T4S Hardware Specifications Copper Ports 48 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI
User’s Manual of GS-4210 Series 4.9.7 DHCP Snooping 4.9.7.1 DHCP Snooping Overview The addresses assigned to DHCP clients on unsecure ports can be ca
User’s Manual of GS-4210 Series If the global DHCP snooping is disabled, all DHCP packets are forwarded. If DHCP snooping is enabled globally,
User’s Manual of GS-4210 Series Object Description DHCP Snooping Indicates the DHCP snooping mode operation. Possible modes are: Enabled: En
User’s Manual of GS-4210 Series Figure 4-9-35 DHCP Snooping VLAN Setting Page Screenshot The page includes the following fields: Object Descriptio
User’s Manual of GS-4210 Series 4.9.7.4 Port Setting Configures switch ports as trusted or untrusted. Command Usage A trusted interface is an i
User’s Manual of GS-4210 Series Figure 4-9-38 DHCP Snooping Port Setting Page Screenshot The page includes the following fields: Object Descriptio
User’s Manual of GS-4210 Series 4.9.7.5 Statistics The DHCP Snooping Statistics screen in Figure 4-9-39 appears. Figure 4-9-39 DHCP Snooping Statist
User’s Manual of GS-4210 Series 4.9.7.6 Database Agent Overview of the DHCP Snooping Database Agent When DHCP snooping is enabled, the switch uses
User’s Manual of GS-4210 Series Remote Server Fill in your remote server IP address Write Delay Specify the duration for which the transfer sho
User’s Manual of GS-4210 Series 4.9.7.7 Rate Limit After enabling DHCP snooping, the switch will monitor all the DHCP messages and implement software
User’s Manual of GS-4210 Series GVRP Management VLAN Link Aggregation IEEE 802.3ad LACP and static trunk Supports 8 groups of 8-port trunk Spanning T
User’s Manual of GS-4210 Series 4.9.7.8 Option82 Global Setting DHCP provides a relay mechanism for sending information about the switch and its DHCP
User’s Manual of GS-4210 Series Figure 4-9-45 Option82 Global Setting Page Screenshot The page includes the following fields: Object Description
User’s Manual of GS-4210 Series Allow Untrusted Select modes for this drop down list. The following modes are available: Drop Keep Replac
User’s Manual of GS-4210 Series 4.9.7.10 Option82 Circuit-ID Setting Set creation method for option82, users can define the parameters of circuit-id
User’s Manual of GS-4210 Series 4.9.8 Dynamic ARP Inspection Dynamic ARP Inspection (DAI) is a secure feature. Several types of attacks can be launch
User’s Manual of GS-4210 Series 4.9.8.2 VLAN Setting DAI VLAN Setting screens in Figure 4-9-52 & Figure 4-9-53 appear. Figure 4-9-52 DAI VLAN Se
User’s Manual of GS-4210 Series 4.9.8.3 Port Setting Configures switch ports as DAI trusted or untrusted and check mode. DAI Port Setting screens in
User’s Manual of GS-4210 Series Figure 4-9-55 DAI Port Setting Page Screenshot The page includes the following fields: Object Description Port
User’s Manual of GS-4210 Series 4.9.8.4 Statistics Configures switch ports as DAI trusted or untrusted and check mode. DAI Port Setting screen in Fig
User’s Manual of GS-4210 Series 4.9.8.5 Rate Limit The ARP Rate Limit Setting and Config screens in Figure 4-9-57 & Figure 4-9-58 appear. Figure
User’s Manual of GS-4210 Series SNMP MIBs RFC 3635 Ethernet-like MIB RFC 2863 Interface Group MIB RFC 2819 RMON (1, 2, 3, 9) RFC 1493 Bridge MI
User’s Manual of GS-4210 Series 4.9.9 IP Source Guard IP Source Guard is a secure feature used to restrict IP traffic on DHCP snooping untrusted port
User’s Manual of GS-4210 Series 4.9.9.1 Port Settings IP Source Guard is a secure feature used to restrict IP traffic on DHCP snooping untrusted port
User’s Manual of GS-4210 Series Figure 4-9-61 IP Source Guard Port Setting Page Screenshot The page includes the following fields: Object Descript
User’s Manual of GS-4210 Series 4.9.9.2 Binding Table The IP Source Guard Static Binding Entry and Table Status screens in Figure 4-9-62 & Figure
User’s Manual of GS-4210 Series 4.9.10 Port Security This page allows you to configure the Port Security Limit Control system and port settings. Limi
User’s Manual of GS-4210 Series and reconnected on the port (by disconnecting the cable), the port will remain shut down. There are three ways to re-
User’s Manual of GS-4210 Series 4.9.11 DoS The DoS is short for Denial of Service, which is a simple but effective destructive attack on the internet
User’s Manual of GS-4210 Series The page includes the following fields: Object Description DMAC = SMAC Enable or disable DoS check mode by DMAC =
User’s Manual of GS-4210 Series Figure 4-9-67 DoS Information Page Screenshot The page includes the following fields: Object Description DMAC =
User’s Manual of GS-4210 Series 4.9.11.2 DoS Port Setting The DoS Port Setting and Status screens in Figure 4-9-68 & Figure 4-9-69 appear. Figur
User’s Manual of GS-4210 Series 2. INSTALLATION This section describes the hardware features and installation of the Managed Switch on the desktop or
User’s Manual of GS-4210 Series 4.9.12 Storm Control Storm control for the switch is configured on this Page. There is an unknown unicast storm rate
User’s Manual of GS-4210 Series 4.9.12.2 Port Setting Storm control for the switch is configured on this page. There are three types of storm rate co
User’s Manual of GS-4210 Series Figure 4-9-72 Storm Control Information Page Screenshot The page includes the following fields: Object Description
User’s Manual of GS-4210 Series 4.10 ACL ACL is an acronym for Access Control List. It is the list table of ACEs, containing access control entries t
User’s Manual of GS-4210 Series 4.10.1 MAC-based ACL This page shows the ACL status by different ACL users. Each row describes the ACE that is define
User’s Manual of GS-4210 Series 4.10.2 MAC-based ACE An ACE consists of several parameters. Different parameter options are displayed depending on th
User’s Manual of GS-4210 Series User Defined: If you want to filter a specific destination MAC address with this ACE, choose this value. A field f
User’s Manual of GS-4210 Series The page includes the following fields: Object Description ACL Name Display the current ACL name Sequence Dis
User’s Manual of GS-4210 Series 4.10.3 IPv4-based ACL This page shows the ACL status by different ACL users. Each row describes the ACE that is defin
User’s Manual of GS-4210 Series 4.10.4 IPv4-based ACE An ACE consists of several parameters. Different parameter options are displayed depending on t
User’s Manual of GS-4210 Series Gigabit TP Interface 10/100/1000BASE-T Copper, RJ45 Twisted-pair: Up to 100 meters. 100/1000BASE-X SFP Sl
User’s Manual of GS-4210 Series The page includes the following fields: Object Description ACL Name Select ACL name for this drop down list. S
User’s Manual of GS-4210 Series matches this source port value. Range: If you want to filter a specific source port range filter with this ACE, yo
User’s Manual of GS-4210 Series Don’t Care: Any value is allowed ("don't-care"). SYN Specify the TCP "Synchronize sequence nu
User’s Manual of GS-4210 Series Buttons : Click to add ACE list. Figure 4-10-8 IPv4-based ACE Table Page Screenshot The page includes the followin
User’s Manual of GS-4210 Series 4.10.5 IPv6-based ACL This page shows the ACL status by different ACL users. Each row describes the ACE that is defin
User’s Manual of GS-4210 Series 4.10.6 IPv6-based ACE An ACE consists of several parameters. Different parameter options are displayed depending on t
User’s Manual of GS-4210 Series The page includes the following fields: Object Description ACL Name Select ACL name for this drop down list Se
User’s Manual of GS-4210 Series matches this source port value. Range: If you want to filter a specific source port range filter with this ACE, yo
User’s Manual of GS-4210 Series Don’t Care: Any value is allowed ("don't-care"). SYN Specify the TCP "Synchronize sequence nu
User’s Manual of GS-4210 Series Buttons : Click to add ACE list Figure 4-10-12 IPv6-based ACE Table Page Screenshot The page includes the followin
User’s Manual of GS-4210 Series 2.1.2 LED Indications The front panel LEDs indicate instant status of port links, data activity and system power; it
User’s Manual of GS-4210 Series 4.10.7 ACL Binding This page allows you to bind the Policy content to the appropriate ACLs. The ACL Policy screens in
User’s Manual of GS-4210 Series 4.11 MAC Address Table Switching of frames is based upon the DMAC address contained in the frame. The Managed Switch
User’s Manual of GS-4210 Series 4.11.1 Static MAC Setting The static entries in the MAC table are shown in this table. The MAC table is sorted first
User’s Manual of GS-4210 Series 4.11.2 MAC Filtering By filtering MAC address, the switch can easily filter the per-configured MAC address and reduce
User’s Manual of GS-4210 Series 4.11.3 Dynamic Address Setting By default, dynamic entries are removed from the MAC table after 300 seconds. The Dyna
User’s Manual of GS-4210 Series 4.11.4 Dynamic Learned Dynamic MAC Table Dynamic Learned MAC Table is shown on this page. The MAC Table is sorted fir
User’s Manual of GS-4210 Series Object Description MAC Address The MAC address of the entry VLAN The VLAN ID of the entry Type Indicates wh
User’s Manual of GS-4210 Series 4.12 LLDP 4.12.1 Link Layer Discovery Protocol Link Layer Discovery Protocol (LLDP) is used to discover basic infor
User’s Manual of GS-4210 Series 4.12.2 LLDP Global Setting This Page allows the user to inspect and configure the current LLDP port settings. The LLD
User’s Manual of GS-4210 Series TTL in seconds is based on the following rule: (Transmission Interval * Holdtime Multiplier) ≤ 65536. Therefore, the
User’s Manual of GS-4210 Series TABLE OF CONTENTS 1. INTRODUCTION...
User’s Manual of GS-4210 Series GS-4210-8P2T2S LED Indication Figure 2-1-2b GS-4210-8P2T2S LED Panel System LED Color Function PWR Green L
User’s Manual of GS-4210 Series The page includes the following fields: Object Description LLDP Enable Display the current LLDP status LLDP PD
User’s Manual of GS-4210 Series Tx only Rx only TxRx Disabled Port Select Select port for this drop down list Optional TLV Select C
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port The switch port number of the logical port Sta
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port The switch port number of the logical port Sel
User’s Manual of GS-4210 Series Figure 4-12-8 Port Status Page Screenshot The page includes the following fields: Object Description Interface
User’s Manual of GS-4210 Series 4.12.5 LLDP Remove Device This Page provides a status overview for all LLDP remove devices. The displayed table conta
User’s Manual of GS-4210 Series 4.12.6 MED Network Policy Network Policy Discovery enables the efficient discovery and diagnosis of mismatch issues w
User’s Manual of GS-4210 Series Figure 4-12-10 Voice Auto Mode Configuration and Network Policy Configuration Page Screenshot The page includes the
User’s Manual of GS-4210 Series those advertised in the Guest Voice application policy. Softphone Voice - for use by softphone applications on typica
User’s Manual of GS-4210 Series DSCP value as defined in RFC 2475. Buttons : Click to apply changes. Figure 4-12-11 LLDP MED Network Policy Table
User’s Manual of GS-4210 Series GS-4210-24P (L) 4C LED Indication Figure 2-1-2c GS-4210-24P (L) 4C LED Panel System / Alert LED Color Functio
User’s Manual of GS-4210 Series 4.12.7 MED Port Setting The Port LLDP MED Configuration/Port Setting Table screens in Figure 4-12-12 & Figure 4-1
User’s Manual of GS-4210 Series Figure 4-12-13 Port LLDP MED Configuration Page Screenshot The page includes the following fields: Object Descript
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Port Select port for this drop down list Location C
User’s Manual of GS-4210 Series 4.12.8 LLDP Overloading The LLDP Port Overloading screen in Figure 4-12-16 appears. Figure 4-12-16 LLDP Port Overloa
User’s Manual of GS-4210 Series Optional TLVs If the LLDP MED extended power via MDI packets were sent, or if they were overloaded MED Inventor
User’s Manual of GS-4210 Series Figure 4-12-18 LLDP Port Statistics Page Screenshot The page includes the following fields: Object Description
User’s Manual of GS-4210 Series 4.13 Diagnostics This section provide the Physical layer and IP layer network diagnostics tools for troubleshoot. The
User’s Manual of GS-4210 Series The Copper test and test result screens in Figure 4-13-1 & Figure 4-13-2 appear. Figure 4-13-1 Copper Test Page
User’s Manual of GS-4210 Series 4.13.2 Ping The ping and IPv6 ping allow you to issue ICMP PING packets to troubleshoot IP connectivity issues. The M
User’s Manual of GS-4210 Series Be sure the target IP Address is within the same network subnet of the switch, or you have to set up the correct ga
User’s Manual of GS-4210 Series GS-4210-48T4S LED Indication Figure 2-1-2d GS-4210-48T4S LED Panel System LED Color Function PWR Green L
User’s Manual of GS-4210 Series 4.13.5 Trace Router Traceroute function is for testing the gateways through which the data packets travel from the so
User’s Manual of GS-4210 Series 4.14 RMON RMON is the most important expansion of the standard SNMP. RMON is a set of MIB definitions, used to define
User’s Manual of GS-4210 Series The Page includes the following fields: Object Description Port Select port for this drop down list Drop Event
User’s Manual of GS-4210 Series 4.14.2 RMON Event Configure RMON Event table on this page. The RMON Event screens in Figure 4-14-2 & Figure 4-14-
User’s Manual of GS-4210 Series Figure 4-14-3: RMON Event Status Page Screenshot The page includes the following fields: Object Description Ind
User’s Manual of GS-4210 Series 4.14.4 RMON Alarm Configure RMON Alarm table on this page. The RMON Alarm screens in Figure 4-14-5 & Figure 4-14-
User’s Manual of GS-4210 Series to this multicast address. CRCAlignErrors: The number of CRC/alignment errors (FCS or alignment errors). UnderS
User’s Manual of GS-4210 Series Delta: Calculate the difference between samples. Rising Threshold Rising threshold value (0–2147483647) Fall
User’s Manual of GS-4210 Series 4.14.5 RMON History Configure RMON History table on this page. The RMON History screens in Figure 4-14-7 & Figure
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Index Display the current index Data Source Displa
User’s Manual of GS-4210 Series 2.1.3 Switch Rear Panel The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input
User’s Manual of GS-4210 Series 4.15 Power over Ethernet The GS-4210 PoE Switch Series can easily build a power central-controlled IP phone system, I
User’s Manual of GS-4210 Series 3314.15.1 Power over Ethernet Powered Device 3~5 watts Voice over IP phones Enterprise can install POE VoIP Phone,
User’s Manual of GS-4210 Series 4.15.2 System Configuration In a power over Ethernet system, operating power is applied from a power source (PSU-powe
User’s Manual of GS-4210 Series In this mode, the port power is not turned on if the PD requests more available power. 4.15.3 Power over Ethernet
User’s Manual of GS-4210 Series This section allows the user to inspect and configure the current PoE port settings as Figure 4-16-3 shows. Figure
User’s Manual of GS-4210 Series only, as 802.3af mode, the system is going to reserve a maximum of 15.4W for PD that supports Class3 level. As IEEE 8
User’s Manual of GS-4210 Series 4.15.4 PoE Schedule This page allows the user to define PoE schedule and scheduled power recycling. PoE Schedule Bes
User’s Manual of GS-4210 Series The screen in Figure 4-16-4 appears. Figure 4-16-4: PoE Schedule Screenshot Please press Add New Rule button to st
User’s Manual of GS-4210 Series Start Min Allows user to set what minute PoE function does by enabling it. End Hour Allows user to set what hou
User’s Manual of GS-4210 Series 4.15.5 PoE Alive Check Configuration The GS-4210 PoE Switch Series can be configured to monitor connected PD’s status
User’s Manual of GS-4210 Series Plug the female end of the power cord firmly into the receptacle on the rear panel of the Managed Switch. Plug the ot
User’s Manual of GS-4210 Series Interval Time (10~300s) This column allows user to set how long system should issue a ping request to PD for detec
User’s Manual of GS-4210 Series 4.16 Maintenance Use the Maintenance menu items to display and configure basic configurations of the Managed Switch.
User’s Manual of GS-4210 Series Figure 4-16-2 Reboot Switch Page Screenshot 4.16.3 Backup Manager This function allows backup of the current image
User’s Manual of GS-4210 Series Figure 4-16-4 Upgrade Manager Page Screenshot The page includes the following fields: Object Description Upgrad
User’s Manual of GS-4210 Series 4.16.5 Dual Image This page provides information about the active and backup firmware images in the device, and all
User’s Manual of GS-4210 Series Image Size Display the current image size Created Time Display the created time 345
User’s Manual of GS-4210 Series 5. SWITCH OPERATION 5.1 Address Table The Switch is implemented with an address table. This address table is composed
User’s Manual of GS-4210 Series No packet loss will occur. 5.5 Auto-Negotiation The STP ports on the Switch have a built-in "Auto-negotiation&q
User’s Manual of GS-4210 Series 6. TROUBLESHOOTING This chapter contains information to help you solve your issue. If the Managed Switch is not funct
User’s Manual of GS-4210 Series 4. If that device works, refer to the next step. 5. If that device does not work, check the AC power Why the Po
User’s Manual of GS-4210 Series 2.2 Installing the Switch This section describes how to install your Managed Switch and make connections to the Manag
User’s Manual of GS-4210 Series APPENDIX A Switch's RJ45 Pin Assignments A.1 1000Mbps, 1000BASE-T Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- B
User’s Manual of GS-4210 Series 351The standard cable, RJ45 pin assignment The standard RJ45 receptacle/connector There are 8 wires on a standard
EC Declaration of Conformity For the following equipment: *Type of Product : 8-Port 10/100/1000Mbps 802.3at PoE + 2-Port 10/100/1000Mbps + 2-P
EC Declaration of Conformity For the following equipment: *Type of Product : 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port Gigabit TP/SFP Combo
User’s Manual of GS-4210 Series Step 5: Supply power to the Managed Switch. Connect one end of the power cable to the Managed Switch. Connect the pow
User’s Manual of GS-4210 Series Figure 2-1-6 Mounting Managed Switch in a Rack Step 6: Proceed with Steps 4 and 5 of session 2.2.1 Desktop Install
User’s Manual of GS-4210 Series 2.2.3 Installing the SFP transceiver The sections describe how to insert an SFP transceiver into an SFP slot. The SFP
User’s Manual of GS-4210 Series MFB-F20 SFP-Port 100BASE-FX Transceiver – 20km MFB-F60 SFP-Port 100BASE-FX Transceiver – 60km MFB-FA20 SFP-P
User’s Manual of GS-4210 Series 4.2.1 System Information...
User’s Manual of GS-4210 Series 40 Figure 2-1-8 How to Pull Out the SFP Transceiver Never pull out the module without lifting up the lever of the
User’s Manual of GS-4210 Series 3. SWITCH MANAGEMENT This chapter explains the methods that you can use to configure management access to the Managed
User’s Manual of GS-4210 Series 3.2 Management Access Overview The Managed Switch gives you the flexibility to access and manage it using any or all
User’s Manual of GS-4210 Series 3.3 Administration Console The administration console is an internal, character-oriented, and command line user inter
User’s Manual of GS-4210 Series You can change these settings, if desired, after you log on. This management method is often preferred because you ca
User’s Manual of GS-4210 Series Figure 3-1-4 Web Main Screen of Managed Switch 3.5 SNMP-based Network Management You can use an external SNMP-bas
User’s Manual of GS-4210 Series 1. Deposit the Planet Smart Discovery Utility in administrator PC. 2. Run this utility as the following screen ap
User’s Manual of GS-4210 Series 2. After setup is completed, press “Update Device”, “Update Multi” or “Update All” button to take effect. The meanin
User’s Manual of GS-4210 Series 4. WEB CONFIGURATION This section introduces the configuration and functions of the Web-based management. About Web-b
User’s Manual of GS-4210 Series 2. When the following login screen appears, please enter the default username "admin" with password “admin
User’s Manual of GS-4210 Series 4.4.3 LAG Port Setting...
User’s Manual of GS-4210 Series Figure 4-1-3 Default Main Page Now, you can use the Web management interface to continue the switch management or man
User’s Manual of GS-4210 Series 4.1 Main Web Page The Managed Switch provides a Web-based browser interface for configuring and managing it. This int
User’s Manual of GS-4210 Series Figure 4-1-5 Managed Switch Main Functions Menu Buttons : Click to save changes or reset to default. : Click to log
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Save Configuration to FLASH Click to save the configur
User’s Manual of GS-4210 Series configuration file to be startup-config. Backup Configuration The backup configuration is empty in FLASH; please s
User’s Manual of GS-4210 Series 4.2 System Use the System menu items to display and configure basic administrative details of the Managed Switch. Und
User’s Manual of GS-4210 Series System Location Display the current system location System Contact Display the current system contact MAC Ad
User’s Manual of GS-4210 Series Object Description Mode Indicates the IP address mode operation. Possible modes are: Static: Enable NTP mode op
User’s Manual of GS-4210 Series Object Description DHCP State Display the current DHCP state. IP Address Display the current IP address. Su
User’s Manual of GS-4210 Series Gateway Provide the IPv6 gateway address of this switch. IPv6 address is in 128-bit records represented as eight
User’s Manual of GS-4210 Series 4.7.2.7 IGMP Forward All ...
User’s Manual of GS-4210 Series 4.2.4 User Configuration This page provides an overview of the current users and privilege type. Currently the only w
User’s Manual of GS-4210 Series Object Description Username Display the current username Password Type Display the current password type Pr
User’s Manual of GS-4210 Series Manual Time To set time manually. Year - Select the starting Year. Month - Select the starting month.
User’s Manual of GS-4210 Series Figure 4-2-9 Time Information Page Screenshot The page includes the following fields: Object Description Curre
User’s Manual of GS-4210 Series 4.2.5.2 SNTP Server Settings The SNTP Server Configuration screens in Figure 4-2-10 & Figure 4-2-11 appear. Figu
User’s Manual of GS-4210 Series 4.2.6 Log Management The Managed Switch log management is provided here. The local logs allow you to configure and li
User’s Manual of GS-4210 Series Figure 4-2-13 Logging Information Page Screenshot The page includes the following fields: Object Description Lo
User’s Manual of GS-4210 Series Buttons : Click to apply changes. Figure 4-2-15 Local Log Setting Status Page Screenshot The page includes the fol
User’s Manual of GS-4210 Series The Remote Syslog screens in Figure 4-2-16 & Figure 4-2-17 appear. Figure 4-2-16 Remote Log Target Page Screensh
User’s Manual of GS-4210 Series Server Info Display the current remote syslog server information Severity Display the current remote syslog sev
User’s Manual of GS-4210 Series 4.9.1.2 802.1X Setting...
User’s Manual of GS-4210 Series Figure 4-2-19 Logging Information Page Screenshot The page includes the following fields: Object Description Ta
User’s Manual of GS-4210 Series 4.2.7 SNMP Management 4.2.7.1 SNMP Overview The Simple Network Management Protocol (SNMP) is an application layer pro
User’s Manual of GS-4210 Series 4.2.7.2 SNMP System Information Configure SNMP setting on this page. The SNMP System global setting screens in Figure
User’s Manual of GS-4210 Series Figure 4-2-23 SNMPv3 View Table Setting Page Screenshot The page includes the following fields: Object Description
User’s Manual of GS-4210 Series Object Description View Name Display the current SNMP view name Subtree OID Display the current SNMP subtree
User’s Manual of GS-4210 Series Read View Name Read view name is the name of the view in which you can only view the contents of the agent. The al
User’s Manual of GS-4210 Series 4.2.7.5 SNMP Community Configure SNMP Community on this page. The SNMP Community screens in Figure 4-2-27 & Figur
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Community Name Display the current community type G
User’s Manual of GS-4210 Series MD5: An optional flag to indicate that this user using MD5 authentication protocol. SHA: An optional flag to
User’s Manual of GS-4210 Series 4.2.7.7 SNMPv1, 2 Notification Recipients Configure SNMPv1 and 2 notification recipients on this page. The SNMPv1, 2
User’s Manual of GS-4210 Series 4.9.11.2 DoS Port Setting ...
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Server Address Display the current server address S
User’s Manual of GS-4210 Series Retries Indicates the SNMP trap inform retry times. The allowed range is 1 to 255. Buttons : Click to add a new S
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Engine ID An octet string identifying the engine ID th
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Remote IP Address Indicates the SNMP remote engine ID
User’s Manual of GS-4210 Series 4.3 Port Management Use the Port Menu to display or configure the Managed Switch's ports. This section has the f
User’s Manual of GS-4210 Series Speed Select any available link speed for the given switch port. Draw the menu bar to select the mode. Auto - S
User’s Manual of GS-4210 Series Object Description Port This is the logical port number for this row Description Click to indicate the port
User’s Manual of GS-4210 Series Figure 4-3-4 Interface Counters Page Screenshot Object Description Received Octets The total number of octets r
User’s Manual of GS-4210 Series Received Broadcast Packets The number of packets, delivered by this sub-layer to a higher (sub-) layer, addressed
User’s Manual of GS-4210 Series operating in full-duplex mode. Frame Too Long A count of frames received on a particular interface that exceeds th
User’s Manual of GS-4210 Series 4.14.5 RMON History ...
User’s Manual of GS-4210 Series Multicast Packets The total number of good frames received that were directed to this multicast address. CRC /
User’s Manual of GS-4210 Series 4.3.3 Bandwidth Utilization The Bandwidth Utilization page displays the percentage of the total available bandwidth b
User’s Manual of GS-4210 Series 4.3.4 Port Mirroring Configure port Mirroring on this page. This function provides monitoring of network traffic that
User’s Manual of GS-4210 Series The page includes the following fields: Object Description Session ID Set the port mirror session ID. Possible
User’s Manual of GS-4210 Series 4.3.5 Jumbo Frame This page provides to select the maximum frame size allowed for the switch port. The Jumbo Frame sc
User’s Manual of GS-4210 Series 4.3.6 Port Error Disabled Configuration This page provides to set port error disable function. The Port Error Disable
User’s Manual of GS-4210 Series Buttons : Click to apply changes. Figure 4-3-14 Error Disabled Information Page Screenshot The page includes the
User’s Manual of GS-4210 Series 4.3.7 Port Error Disabled This page provides disable that transitions a port into error disable and the recovery opti
User’s Manual of GS-4210 Series For protected port group to be applied, the Managed switch must first be configured for standard VLAN operation. Por
User’s Manual of GS-4210 Series Figure 4-3-16 Protected Ports Settings Page Screenshot The page includes the following fields: Object Description
Kommentare zu diesen Handbüchern