Planet CS-1000 Bedienungsanleitung PDF herunterladen (Seite 99)

Multi-Homing Security Gateway User’s Manual

 Uptime：Displays the connection time between PPTP Server and Client.

 Configure：Click Modify to modify the PPTP Client settings or click Remove to remove the

item.

Modifying PPTP Server Design

Step 1. Select VPN→PPTP Server.

Step 2. Click Modify after the Client IP Range.

Step 3. In the Modify Server Design Window, enter appropriate settings.

 Disable PPTP: Check to disable PPTP Server.

 Enable PPTP: Check to enable PPTP Server.

Encryption: the default is set to disabled.

Client IP Range: Enter the IP range allocated for PPTP Clients when they connect to

the PPTP server.

 Allow remote client to connect to Internet: Check to allow remote PPTP client accessing

Internet via PPTP tunnel.

 Auto-Disconnect if idle □ minutes: Configure this device to disconnect to the PPTP

Server when there is no activity for a predetermined period of time. To keep the line always

connected, set the number to 0.

 Echo-Request Retry □ times Timeout □ Second: CS-1000 will check the VPN

tunnel status according to this configuration, when CS-1000 does not receive the response,

it will stops the VPN connection and keep detecting the VPN status in order to revive the

VPN connection. Retry 0 times means to disable the function.

Step 4. Click OK to save modifications or click Cancel to cancel modifications

Adding PPTP Server

- 93 -

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 225 226

Keine Kommentare

Planet CS-1000 Bedienungsanleitung Seite 99