Planet FPS-3300 Bedienungsanleitung

Multi-Port Fast Ethernet Print Server FPS-3300 User’s Manual 1

6. Please check the information of Summary screen. click “Next” to continue. 7. Please click “Finish” to complete the print server installation.

3.2 Configuration Utility Installation For the client PCs, you can run this program to add the print server to client PCs with most convenient.

4. When installation complete, please click “Finish” to complete. 12

3.2 Uninstalling the PSAdmin on Windows PC To help users easily remove all installed software components of the PSAdmin from their Windows PC, and t

4. Configure with PSAdmin FPS-3300 has provide a Windows base utility for user to configure. After the configuration utility is successfully installe

4.1.1 TCP/IP Wizard 1. Select TCP/IP Wizard in Configuration Wizard screen and click “Next”. 2. Select “Obtain an IP address from DHCP server”. If

4. In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to use. 5. (Optional) In the Gateway field, ty

4.2 Print Server Properties .4.2.1 General In this option, you can modify the Device Name and change the password as you want. When you press the P

4.2.2 TCP/IP If there is a DHCP Server in your network, you may select “Obtain an IP address from a DHCP server” to let this FPS-3300 get the IP addr

Netware Settings: Please type in the Print server that created during PCONSOLE. And set the Polling Time interval of the print server for waiting p

Copyright (C) 2006 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLA

4.2.4 Apple Talk Select “Apple Talk” option and the AppleTalk configuration window will pop-up. AppleTalk is a data communication protocol often use

4.2.5 SNMP This print server has support SNMP protocol for users user SNMP management tool to monitor from a remote site. You can Enable this protoc

4.2.6 Advanced In this option, you can make some advance settings to your FPS-3300. Settings: You can Enable/Disable the Netware Bindery and NDS pri

2. Make sure that the firmware is located in the same directory as PSAdmin (C:\Program File\Network Print Monitor). Then click “Next” to upgrade. 4

5. HP Web JetAdmin 5.1 HP Web JetAdmin Overview HP Web JetAdmin allows you to use a Web browse to revise, view, manage and diagnose devices connecte

Follow the instructions on the appropriate home page to configure or modify your printer. Note: You can also substitute the server domain with TCP/I

6. Configuration with Web Browser The Print Server contains an embedded web server that can be accessed through a supported web browser on a LAN, for

6.1.1 System Function Description Print Server Name This option allows you to view device name of the print server. To correct the print server’s

6.1.2 Printer Function Description Manufacturer This option allows you to view manufacturer of the printer. When the printer connected with the pr

6.1.3 TCP/IP Function Description Use DHCP/BOOTP This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your netw

TABLE OF CONTENTS 1. INTRODUCTION...

6.1.4 Netware Function Description General Settings Print Server Name This option allows you to view print server’s name would be configured by PSAd

6.1.5 AppleTalk Function Description AppleTalk Settings If no any zone exists, the print server itself displays the zone name as an asterisk (*)

6.1.6 SNMP Function Description SNMP Communities This option allows you to view SNMP communities from the print server. There are two communities

6.1.7 SMB Function Description Workgroup Name This option allows you to view the SMB Workgroup Name from the print server. It must match the SMB w

6.2.1 System Function Description Email Alert This option allows you to Enable/Disable the Email Alert support. SMTP Server IP Address This option

If you have setup a password to FPS-3300, your will see this dialog box to ask you enter the user name and password. After enter correct value, you w

6.2.2 Printer Function Description Bi-directional Settings This option allows you to select the bi-directional of the print server. There are two w

Function Description DHCP/BOOTP This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network. This option al

Function Description Print Server Name This option allows you to input print server name which configured by PSAdmin utility or PCOMSOLE program. Pol

Note: Please refer to NetWare’s Print Server/Services manuals for detailed PCONSOLE commands. 6.2.5 AppleTalk The print server can print jobs su

11.1 HARDWARE ...

6.2.5.1 Setting Up a Macintosh Computer 1. At a Macintosh computer, from the Apple menu, select Chooser. 2. The Chooser window then displays an Ap

In the print server's SNMP implementation, the following MIB objects are available for updating. MIB Object Names Description system.sysC

6.2.7 SMB The print server supports the SMB (Server Message Block) protocol, user can send the print jobs through Network Neighborhood without install

7. Network Print Monitor The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me. Please make sure that the followin

7.2 IPX/SPX-compatible Protocol Installation 1. Click Start, point to Settings, and select Control Panel. 2. Double click the Network icon. 3. If th

8. Select LPT1 and click Next. 9. Type in the Printer Name and click Next. 10. A message reading, “After your printer is installed, Windows can pri

 If the IPX/SPX protocol is not installed, no print server will be shown in the display box. Then please select TCP/IP or NetBEUI alternatively. 

8. LPR Printing Installation When installing your print server in a TCP/IP environment, IP addresses are essential as a basic means of communication

6. The Add LPR compatible printers box will then appear as shown in the following picture. Type in the IP address assigned to the print server in the

6. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture, Select Custom, Click Settings button, and click Next. 7.

1. Introduction Equipped with the Parallel printing interfaces, the FPS-3300 makes your printer sharing available in most popular network environmen

Note: Please DO NOT type any other name than lp1, lp2 and lp3 in this step. 9. Click Finish. 10. Select the appropriate printer manufacturer and p

8.3 UNIX Installation After the static IP address is assigned, the Print Server is ready to be configured. For some UNIX/Linux systems, we include th

1. Make sure that the TCP/IP is well configured on your RedHat system, including network interface card's driver and IP-related settings say, I

8. In the Name field, type a user-defined name, click Forward. 9. In the Queue Type field, choose Networked UNIX. 10. In the Server field, type

14. Choose the model of printer and click Forward. 15. Done. 54

9. SMB Printing with Windows XP 1. Enable the SMB settings from the print server’s WEB configuration. Assume your computers use the “WORKGROUP” as

3. Double click it again. 4. Now you have to install the printer’s driver. 56

5. Choose it from the “Add Printer Wizard”. 6. Install printer successfully.

7. Now, you can find your printer’s icon and you can use the SMB printing mode. 58

10. Upgrading Print Server Upgrading print server will allow you to upgrade its firmware inside the print server while the newer software version of

1.4 LED Indicators LED State Indication ACT Blinking for POST (Green) When power switched on, the Status indicator will flash five times, and then o

9. Done. 10.4 Upgrading the print server from Browser 1. Ensure binary file is located in your current working directory. 2. Enter the IP addres

11. Reset to Default 11.1 Hardware You may press the RESET button on the FPS-3300 over 5 seconds. Reset ButtonLINKPOWER 11.2 Software Please log

12. Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in this

RIP for NWLink IPX/SPX compatible transport Installation Procedure 1. From your Windows NT server that is used as a router, select Start from the bo

5. Click Port Settings as shown in the picture below. The print server will be displayed on the next print server’s configuration screen. Find your or

If this is the case, please ensure the Node ID field in the corresponding entry of the print server's IP address in NT's ARP cache table i

6. In your editor, modify "BoxIPAddress" field from "0.0.0.0" to "192.72.214.100". Leave other options as default and d

Reset Button Reboot the Print server: 1. Verify the power of print server is turned on. 2. Press the reset button once, and then release it. WARNI

Specification Model FPS-3300 Media Interface 1-port RJ-45 UTP Standards IEEE802.3, 10Base-T; IEEE802.3u, 100Base-TX Cabling Category 5/5e or above,

Frequently Asked Questions Question A Print jobs are sent to the print queue successfully, but fail to be sent to the printer. Possible explanatio

2. Print Server Installation 2.1 Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking enviro

The print server name, the printer name, or the print queue name you specified in the Auto Setup dialogue box contains a space. Solution Check to see

Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print serve

3. Software Installation 3.1 Quick Installation For the client PCs, you can run this program to add the print server to client PCs with most convenie

4. In Change Settings screen, please select “No, ” and press “Next” to continue. 5. In the Select A Printer screen, please select the printer tha