Planet FSD-504HP Bedienungsanleitung PDF herunterladen

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Check the following contents of your package:

 Fast Ethernet High Power PoE Switch x 1

 User's Manual x 1

 Power Adapter x 1

 Power Cord x 1

 Rubber Feet x 4

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them

again to repack the product in case there is a need to

return it to us for repair.

4. LED Indicators

 System

LED Color Function

PWR Green

Light: Indicates the Switch has

power.

 Per 10/100Mbps Port

LED Color Function

PoE Orange

Light: Indicates the port is

providing 56V DC in-line

power.

LNK/ACT Green

Light: Indicates the link

through that port is

successfully established

at 10/100Mbps.

Blink: Indicates that the Switch

is actively sending or

receiving data over that

port.

2. Product Features

 RJ-45 Interface

Five 10/100Mbps Fast Ethernet ports

 4 ports support 56V DC power to PoE Powered

Device

 Power over Ethernet

 Complies with IEEE 802.3af / at Power over

Ethernet Mid-Span PSE

 Up to 4 IEEE 802.3af / 2 IEEE 802.3at devices

powered

 Supports PoE Power up to 30 watts for each PoE

port

 60 watts PoE Budget

 Auto detects powered device (PD)

 Circuit protection prevents power interference

between ports

 Remote power feeding up to 100m

 Switching

 Hardware based 10/100Mbps Auto-Negotiation and

Auto MDI/MDI-X

 Flow control for Full Duplex operation and back

pressure for Half Duplex operation

 1536Bytes packet size support

 Integrates address look-up engine, supporting 1K

absolute MAC addresses

 Automatic address learning and address aging

 Hardware

 Desktop palm size

 LED indicators for PoE ready / activity and LINK /

ACT

 One DC 56V power jack

5. Switch Rear Panel

Figure 5-1 shows the rear panel of FSD-504HP.

56V DC

135 4 2

Uplink

Figure 5-1: FSD-504HP Rear Panel

Power

Notice

1. The device is a power-required device,

meaning it will not work till it is powered.

If your networks should be active all the

time, please consider using UPS (Uninter-

rupted Power Supply) for your device. It

will prevent you from network data loss

or network downtime.

2. In some area, installing a surge suppres-

sion device may also help to protect your

FSD-504HP from being damaged by un-

regulated surge or current to the FSD-

504HP or the power adapter.

3. The FSD-504HP acceptable power supply

range is DC 48V to DC 56V.

3. Switch Front Panel

Figure 3-1 shows the front panel of FSD-504HP.

PoE

PWR 1 2 3 4 5

FSD-504HP

ACTLNK

5-Port 10/100Mbps

802.3at PoE+ Switch

Figure 3-1: FSD-504HP Front Panel

6. Installing the Switch

This part describes how to install your Fast Ethernet

High Power PoE Switch and make connections to

it. Please read the following topics and follow the

procedures as presented.

Note

This Fast Ethernet High Power PoE Switch

does not need software configuration.

Desktop Installation

To install the Fast Ethernet High Power PoE Switch on

desktop, simply follow the following steps:

Step 1: Attach the rubber feet to the recessed areas

on the bottom of the Fast Ethernet High Power

PoE Switch.

Step 2: Place the Fast Ethernet High Power PoE Switch

on desktop near AC power source for its power

adapter.

Step 3: Keep enough ventilation space between the

Fast Ethernet High Power PoE Switch and the

surrounding objects.

Note

When choosing a location, please keep in

mind the environmental restrictions dis-

cussed in Chapter 7 -- Product Specifica-

tions.

Step 4: Connect your Fast Ethernet High Power PoE

Switch to network devices.

A. Connect one end of a standard network cable to

the 10/100Mbps RJ-45 ports on the back of the

Fast Ethernet High Power PoE Switch.

B. Connect the other end of the cable to the network

devices such as printer servers, workstations or

routers.

Step 5: Connect your Fast Ethernet High Power PoE

Switch to PoE PD devices.

A. Connect one end of a standard network cable to

port 2 to port 5 10/100Mbps RJ-45 ports on the

back of the Fast Ethernet High Power PoE Switch.

B. Connect the other end of the cable to the 802.3at /

af powered devices.

Office Building

Office Area

Warehouse

Control Room

Speed Dome

IEEE 802.3af

PoE IP Camera

PoE Extender

IEEE 802.3af PoE

VoIP Phone

IEEE 802.3af

PoE IP Camera

IEEE 802.3at

PoE Splitter

FSD-504HP

PoE

Power Line (DC)

100Base-TX UTP

PoE

100Base-TX UTP with PoE

1 2

Inhaltsverzeichnis

Seite 1 - Desktop Installation

- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 -- 8 -1. Package ContentsCheck the following contents of your package: Fast Ethernet High Power PoE Switch x 1 U

Seite 2 - EC Declaration of Conformity

- 9 -- 10 - - 12 - - 13 -- 11 -NoteCable distance for SwitchThe cable distance between the FSD-504HP and PC / PD devices should not exceed 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Planet FSD-504HP Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Router Planet FSD-504HP herunter. PLANET FSD-504HP User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Planet FSD-504HP